Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S
Dial in a precise forward stop on-site with the AirTAC MICJ32X200-100S, a double-acting round-body mini cylinder featuring a 100 mm adjustable extend stroke. An external stop screw lets you trim the forward end position down from the 200 mm nominal maximum without swapping hardware, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. The stainless-steel barrel and Ø12 mm piston rod resist mild corrosion and washdown environments.
Driven by a 1/8" port, this Ø32 mm bore generates 402.2 N of push force and 345.6 N of pull at 0.5 MPa. That translates to a safe working load of roughly 241 N, or a vertical lift capacity of about 20.5 kg with a 2:1 safety margin. The built-in magnet (-S) directly supports CMSG, DMSG and EMSG position sensing.
Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S Is Used
Package Diverting Gate
Tune the 100 mm extend stop to match varying box sizes on the fly, relying on the 402.2 N push force to swing the diverter and the air cushion to absorb the impact at high cycling speeds.
Vertical Parts Press
Lower components with a safe working load of 241 N, adjusting the forward stop down from 200 mm to set the exact pressing depth while the needle cushion decelerates the rod before contact.
Pallet Stopper Arm
Deploy a rugged stainless-steel barrier to halt incoming pallets, using the adjustable extend stroke to accommodate different pallet widths without repositioning the cylinder mount.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S the Right Cylinder?
When sizing this unit, step down to the Ø25 bore if your load requires less than 245.3 N of push at 0.5 MPa, or step up to the Ø40 bore for heavier rigs demanding 628.3 N. The Ø32 hits a solid middle ground, and the 100 mm extend adjuster is ideal for fast set-position moves where you need to tune the forward stop on the fly. Remember the stop screw sets the end position but is not a mid-stroke lock.
Because a plain cylinder drifts on air loss, use an external rod lock or pilot check valve if you must hold a suspended load. For mounting, utilize LB foot, FA flange or TC trunnion brackets (the SDB pivot block is not offered on this adjustable variant). The -S magnet enables CMSG/DMSG/EMSG sensors for precise end-of-stroke confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S FAQ
This Ø32 mm bore cylinder uses a 1/8" air port and a male M10x1.25 rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 100 mm on-site, giving a usable forward range of 100-200 mm, while retract remains full. The adjustable air cushion at both ends only decelerates the piston near stroke end to absorb shock; it is not a mid-stroke lock or brake. The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.