Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S
Dial in the forward stop on site with the AirTAC MICJ32X200-10S, a double-acting round-body stainless steel mini cylinder. An external screw shortens the extend end position by up to 10 mm, giving a usable forward travel of 190-200 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. The retract stroke remains full. Built with a stainless barrel and rod, it resists mild corrosion and washdown environments.
This Ø32 mm non-ISO-6432 variant delivers 402.2 N of push force and 345.6 N of pull force at 0.5 MPa, peaking at an 82 kgf theoretical maximum at 1.0 MPa. It provides a safe working load of roughly 241 N, translating to a vertical lift capacity of about 20.5 kg with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread handle the air and load requirements, and the built-in magnet enables CMSG, DMSG, or EMSG sensors for position feedback.
Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S Is Used
Press Fit Dialing
Trim the 200 mm extend stroke by up to 10 mm to set precise press depths for 20.5 kg sub-assembly inserts, letting the dual air cushions absorb the high-speed impact without shock loading the tooling.
Heavy Transfer Divert
Move heavier pallets along a washdown line using the 402.2 N push force, relying on the stainless construction and 1/8" port to deliver rapid actuation and smooth deceleration at the end of travel.
Carton Flap Tucking
Set the exact forward tuck position for varying carton sizes on the fly, using the external stop screw to prevent overtravel while the needle cushion handles the 30-800 mm/s operating speed.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S the Right Cylinder?
When sizing this 32 mm bore, stepping down to the Ø25 model reduces the 0.5 MPa push force to 245.3 N, whereas stepping up to the Ø40 bore increases it to 628.3 N. Choose this model when you need fast, settable-position moves where the 10 mm extend trim prevents hard mechanical crashes, and the dual adjustable air cushions control the impact. The stop screw sets the end position but is not a mid-stroke lock; the piston drifts on air loss, so add an external rod lock or pilot check valve to hold a suspended load.
Mount using LB foot, FA flange, or TC trunnion brackets, or choose CA, U, R, or CM back covers. The SDB pivot block is not available on this adjustable-stroke variant. Because this SKU includes the -S magnet, you can mount CMSG, DMSG, or EMSG switches directly for precise end-of-stroke detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S FAQ
This double-acting cylinder delivers a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa, and a push of 563 N and pull of 483.8 N at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa. It uses a 1/8" air port and a 12 mm piston rod with an M10x1.25 male thread.
An external screw shortens the extend stroke by up to 10 mm on site, giving a usable forward travel of 190-200 mm, while the retract stroke remains fixed. Needle valves control an adjustable air cushion at both ends to decelerate the piston near the end of travel. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.