Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100
Dial in a precise forward stop on-site with the AirTAC MICJ32X300-100, a round-body stainless-steel mini cylinder built for double-acting operation. An external screw trims the extend stroke by up to 100 mm, letting you set a usable forward range of 200-300 mm without swapping hardware, while a needle-set adjustable air cushion at both ends absorbs high-speed shock. The 1/8" port and Ø12 rod handle a robust 402.2 N of push force at 0.5 MPa.
The stainless barrel and piston rod resist mild corrosion and washdown environments. Because this SKU lacks the -S magnet option, it cannot host CMSG, DMSG, or EMSG sensors. For vertical lifts, expect a safe working capacity of about 241 N, which moves roughly 20.5 kg with a 2:1 safety margin. Note that the stop screw sets the end position but does not function as a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100 Is Used
Package Diverting Gate
Tune the 200-300 mm extend stroke to actuate a routing gate precisely, using the dual air cushions to stop the 402 N push force smoothly at high cycle rates.
Vertical Press Down
Lower a 20 kg assembly fixture reliably; the 100 mm extend trim lets you set the exact lowering depth without machining spacers, while the cushion softens the impact.
Pallet Stopper Arm
Deploy a heavy-duty stop arm for incoming pallets. The stainless build handles mildly corrosive logistics environments, and the external screw adjusts the stopping distance on-site.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100 the Right Cylinder?
At 0.5 MPa, this Ø32 bore delivers 402.2 N push and 345.6 N pull. If you need less force, the smaller Ø25 bore offers 245.3 N push; if your load demands more, step up to the Ø40 bore with 628.3 N push. This adjustable-stroke design shines in fast set-position moves where you need to tune the extend end on the fly and rely on the dual air cushions to decelerate the payload smoothly.
Mount using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers (the SDB pivot-block is not offered on this variant). Remember that a standard cylinder drifts on air loss—the cushion only decelerates near the stroke end, so install an external rod lock or pilot check valve if you must hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100 FAQ
This Ø32 mm cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it provides 402.2 N push and 345.6 N pull; at 0.7 MPa it provides 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm (retract remains full), and a needle valve adjusts the air cushion at both ends to absorb high-speed shock. This specific SKU has no magnet (-S), so it cannot support CMSG/DMSG/EMSG sensors; the cushion only decelerates near stroke end and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.