Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S
Dial in a precise forward stop without swapping hardware: the MICJ32X300-100S uses an external screw to trim the extend stroke by up to 100 mm on site, yielding a usable 200-300 mm forward travel while retract remains full. A needle-set variable air cushion at both ends soaks up high-speed shock, letting you set the position and control the impact simultaneously.
This double-acting round-body stainless mini cylinder pushes with 402.2 N and pulls with 345.6 N at 0.5 MPa, fed by a 1/8" port with a 12 mm rod and M10x1.25 male thread. The stainless barrel and rod resist mild corrosion and washdown. Because this is a 32 mm bore, it is a non-ISO-6432 size. The built-in magnet (-S) supports CMSG, DMSG and EMSG switches. Expect a safe working load around 241 N, or a vertical lift of about 20.5 kg with a 2:1 margin.
Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S Is Used
Variable Length Carton Pusher
Pushes mixed carton sizes at speed on a 1/8" air line, trimming the 300 mm extend stroke up to 100 mm to match box depth while the dual air cushions absorb the 402.2 N impact.
Adjustable Stroke Clamping Press
Clamps steel billets in a washdown cell, using the stainless construction and needle-set cushions to decelerate the 241 N safe working load smoothly before hitting the final position.
Multi-Tier Diverter Arm
Swings packages to different conveyor lanes by adjusting the forward reach on site, relying on the 32 mm bore to deliver 563 N at 0.7 MPa without changing the cylinder body.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S the Right Cylinder?
Size both ways against your force needs: stepping down to the 25 mm bore drops the 0.5 MPa push force to 245.3 N, while stepping up to the 40 mm bore raises it to 628.3 N. Choose this 32 mm variant when you need roughly 241 N of safe working force combined with on-the-fly extend tuning and high-speed cushioning. The external screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load.
Mount using LB foot, FA flange or TC trunnion brackets (the SDB pivot block is not offered on this adjustable variant). Select back covers CA, U, R or CM for routing. The -S magnet enables CMSG, DMSG and EMSG sensors for position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S FAQ
This 32 mm bore cylinder features a 1/8" port and a 12 mm rod. At 0.5 MPa it pushes with 402.2 N and pulls with 345.6 N. At 0.7 MPa it pushes with 563 N and pulls with 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend end position by up to 100 mm (usable extend 200-300 mm), while needle-set air cushions at both ends decelerate the piston at high speed. The -S suffix provides a magnet for CMSG/DMSG/EMSG sensors. The stop screw and cushions do not lock or hold the load; the piston drifts on air loss, so use an external rod lock for suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X300-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.