Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30
Dial in a precise forward stop on site with the AirTAC MICJ32X300-30, a round-body stainless-steel mini cylinder built for double-acting operation. An external screw shortens the extend end by up to 30 mm, giving a usable forward range of 270-300 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. The stainless barrel and rod resist mild corrosion and washdown environments. This Ø32 bore delivers 402.2 N of push force at 0.5 MPa.
Featuring a 1/8" port and a Ø12 mm piston rod with an M10x1.25 male thread, it operates at speeds from 30-800 mm/s. This non-magnetic SKU cannot take a sensor; order the -S variant for CMSG/DMSG/EMSG switches. The air cushion only decelerates near the stroke end and is not a lock. For a safe working load, expect about 241 N, or roughly 20.5 kg of vertical lift with a 2:1 margin.
Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30 Is Used
Divert Gate Actuation
Sets a precise 285 mm extend stroke to pivot a heavy divert gate on a packaging line, using the adjustable air cushion to softly stop the 402 N push force at high speed.
Pallet Stopper Block
Extends up to 300 mm to halt incoming pallets on a gravity conveyor, trimming the stop screw 15 mm to match the pallet edge without custom brackets.
Carton Flap Folding
Drives a folding arm at 800 mm/s, relying on the end cushion to absorb shock while the external screw sets the exact forward fold position for various box sizes.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30 the Right Cylinder?
When sizing this 32 mm bore, step down to a Ø25 unit (245.3 N push at 0.5 MPa) for lighter loads, or up to a Ø40 (628.3 N) if you need more force. This model shines in fast set-position moves where the external stop screw dials in the exact 270-300 mm extend position without swapping cylinders, and the dual air cushions absorb the impact. A plain cylinder does not hold its load on air loss; the piston drifts. For a held load, install an external rod lock or pilot check valve. Mount using LB foot, FA flange or TC trunnion (SDB is not available), and note this non-S SKU cannot accept sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30 FAQ
This double-acting cylinder has a 1/8" port and delivers 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 30 mm (usable range 270-300 mm), while needle valves adjust the air cushion at both ends to decelerate high-speed moves. The cushion is not a brake, and the piston drifts on air loss; use a pilot check valve to hold a load. This non-S SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X300-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.