Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S
Dial in the forward stop on-site without swapping hardware using the AirTAC MICJ32X350-100S. This round-body stainless-steel mini cylinder features an external screw that shortens the extend end position by up to 100 mm, giving a usable forward range of 250-350 mm, while the retract stroke remains full. It pairs this settable position with a variable air cushion at both ends to soak up high-speed shock.
Driven by a 1/8" port and a Ø12 mm rod, the 32 mm bore yields 402.2 N of push force at 0.5 MPa. The stainless barrel and piston rod resist mild corrosion and washdown environments. Because this is a -S SKU, a built-in piston magnet enables CMSG, DMSG, or EMSG position sensing. Note that Ø32 is a non-ISO-6432 size. The cushion only decelerates near the stroke end and does not lock the piston mid-travel.
Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S Is Used
Adjustable Clamping Press
Dial the extend stroke down 100 mm to clamp 20.5 kg workpieces securely, relying on the 402.2 N push force and end cushions to absorb the impact of rapid approach speeds.
Variable Length Divertor
Tune the forward stop on-site to push varying box sizes across the belt without changing the cylinder, while the 1/8" port delivers swift actuation.
Washdown Sorting Gate
Leverage the stainless steel construction for mildly corrosive environments, using the -S magnet and DMSG sensors to confirm the gate position through the 350 mm travel.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S the Right Cylinder?
For lighter duty, the Ø25 bore provides 245.3 N push at 0.5 MPa; if you need more muscle, the Ø40 steps up to 628.3 N. The Ø32 hits a sweet spot, offering a computed safe working load of roughly 241 N (about 60% of its 0.5 MPa push force) and a vertical lift capacity around 20.5 kg with a 2:1 safety margin.
The adjustable extend stop plus needle-set cushions are ideal for fast, settable-position moves. Remember that a plain cylinder drifts on air loss—the stop screw sets the end position but is not a mid-stroke lock, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is not available on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S FAQ
This 32 mm bore double-acting cylinder uses a 1/8" port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm (usable range 250-350 mm), while needle valves adjust the air cushions at both ends to decelerate high-speed impacts. The cylinder does not hold position on air loss and drifts; the stop screw is not a mid-stroke lock. Use an external rod lock for held loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X350-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.