Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50
Trim the forward stop by up to 50 mm on site without swapping hardware using this AirTAC adjustable-stroke mini cylinder. The 32 mm bore round-body design pairs a stainless steel barrel and rod with a needle-set variable air cushion at both ends, soaking up high-speed shock while you dial in the exact extend position from 300 to 350 mm.
Delivering 402.2 N of push force at 0.5 MPa, it handles a safe working load of roughly 241 N or lifts about 20.5 kg vertically with a 2:1 margin. This non-ISO-6432 unit uses a 1/8" port and a 12 mm rod. Note that this SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG sensors; choose the -S variant for position sensing.
Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50 Is Used
Divert Gate Positioning
Tune the 50 mm extend stop to strike a divert gate at the exact 320 mm mark, relying on the dual air cushions to absorb the impact of fast 402 N actuation without slamming.
Carton Flap Folding
Fold heavy corrugated flaps on a packaging line where the 241 N safe working load provides ample force, adjusting the forward stroke on the fly to match varying box depths.
Pallet Stop Arm
Halt incoming pallets on a gravity conveyor by setting a cushioned 350 mm maximum stop arm, preventing harsh mechanical crashes at high cycling speeds.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50 the Right Cylinder?
When sizing, the 25 mm bore delivers 245.3 N push at 0.5 MPa, while stepping up to the 40 mm bore yields 628.3 N, so this 32 mm model is the middle ground for moderate loads. The 50 mm extend adjuster and dual cushions excel in fast set-position moves where you must tune the forward stop and decelerate smoothly.
Because it is a double-acting air cylinder, the piston drifts on air loss and the cushion only decelerates near the end of stroke—it is not a mid-stroke lock or brake. For held loads, install an external rod lock or pilot check valve. Mount via LB, FA or TC brackets, as SDB pivot blocks are not offered on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50 FAQ
This double-acting 32 mm bore cylinder pushes 402.2 N and pulls 345.6 N at 0.5 MPa, and pushes 563 N while pulling 483.8 N at 0.7 MPa. Its theoretical maximum force is 82 kgf at 1.0 MPa. The air port is 1/8".
An external screw shortens the extend stroke by up to 50 mm on site, while needle valves adjust the variable air cushions at both ends to decelerate the piston before impact. The cylinder does not hold position on air loss and the cushion is not a brake; for load holding, use an external rod lock. This non-magnet SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X350-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.