Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75
Dial in the forward stop on site without swapping cylinders: the AirTAC MICJ32X350-75 uses an external screw to shorten the extend stroke by up to 75 mm, giving a usable forward range of 275-350 mm while retract remains full. As a double-acting, round-body stainless-steel mini cylinder, it pairs this settable position with a needle-adjustable air cushion at both ends to soak up high-speed shock.
The Ø32 mm bore delivers 402.2 N of push force at 0.5 MPa, making the safe working load roughly 241 N or about 20.5 kg of vertical lift with a 2:1 margin. This non-ISO-6432 round-body unit features a 1/8" port, a Ø12 mm piston rod with an M10x1.25 male thread, and a stainless barrel and rod for mild washdown resistance. Note that this SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75 Is Used
Press Fit Tuning
Dial in the exact 300 mm extend position for pressing small bearings, relying on the 402.2 N push force and cushion to absorb the end-of-stroke impact.
Diverter Stroke Control
Shorten the forward stop on the fly to adapt a 350 mm diverter arm path without changing hardware, using the 1/8" port for rapid actuation.
Carton Flap Folding
Set a precise extend endpoint for folding heavy packaging flaps, letting the adjustable air cushion safely decelerate the 241 N working load at high speed.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75 the Right Cylinder?
When sizing, step down to the Ø25 bore if you need less force (245.3 N push at 0.5 MPa) or step up to the Ø40 bore for heavier moves (628.3 N push). The Ø32 hits a solid middle ground, and its adjustable stop plus dual cushions excel in fast set-position moves where you must tune the impact. Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot-block is not offered on this adjustable variant.
Remember that the stop screw sets the end position but is not a mid-stroke lock. A plain cylinder drifts on air loss, and the cushion only decelerates near the stroke end. To hold a load securely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75 FAQ
This double-acting cylinder has a 1/8" port and delivers 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. Its theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 75 mm, while a needle valve adjusts the air cushion at both ends to absorb high-speed shock. The stop screw is not a mid-stroke lock, and the cylinder will drift on air loss; use an external rod lock to hold a load. This SKU has no magnet, so it cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X350-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.