Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50
Command 402.2 N of push force at 0.5 MPa while trimming the forward stop up to 50 mm on site with the AirTAC MICJ32X50-50. This round-body stainless steel mini cylinder pairs an external extend adjuster with a needle-set air cushion at both ends to dial in the exact landing and soak up high-speed shock.
Built with a 32 mm bore, 12 mm rod and a 1/8" port, it delivers a safe working load of roughly 241 N, moving about 20.5 kg vertically with a 2:1 margin. The riveted stainless barrel shrugs off mild washdown. Note this non-magnetic SKU cannot take a sensor; the -S version adds a magnet for CMSG, DMSG or EMSG switches.
Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50 Is Used
Press Fit Dialing
Trim the 50 mm extend stroke by up to 50 mm to set precise press depth for 402.2 N insertion tasks, relying on the dual air cushions to absorb the high-speed impact.
Heavy Diverter Stop
Arrest fast-moving 20 kg cartons using the adjustable forward stop, letting the needle-set air cushion decelerate the 32 mm bore without slamming.
Washdown Tucking Arm
Deploy the stainless steel rod and barrel in damp packaging lines, adjusting the extend end on the fly to tuck flaps before the retract cycle begins.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50 the Right Cylinder?
For lighter duty, the 25 mm bore delivers 245.3 N push at 0.5 MPa, whereas stepping up to the 40 mm bore yields 628.3 N. Choose this 32 mm size when you need around 400 N of thrust plus a 50 mm extend adjustment window for fast set-position moves. The needle cushion decelerates the piston near stroke end but does not lock mid-stroke. Mount via LB foot, FA flange or TC trunnion (SDB is unavailable). Because this SKU lacks a magnet, position sensing requires the -S variant. To hold a load on air loss, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50 FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa push is 563 N and pull is 483.8 N. The theoretical max is 82 kgf at 1.0 MPa. It uses a 1/8" port, a 12 mm rod and an M10x1.25 male rod thread.
An external screw shortens the extend stroke by up to 50 mm, while a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. The stop screw sets the end position but is not a mid-stroke lock. The piston drifts on air loss, so use an external rod lock for holding. This non-S SKU cannot take a sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X50-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.