Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10
Dial in a precise forward stop on-site with the AirTAC MICJ32X75-10, a stainless round-body mini cylinder featuring a 10 mm extend-stroke adjuster. The external screw trims the forward end position down to a 65 mm usable extend without swapping hardware, while a needle-set variable air cushion at both ends soaks up high-speed shock. This double-acting actuator delivers 402.2 N of push force at 0.5 MPa.
Built with a stainless-steel barrel and rod for mild washdown resistance, it operates at speeds of 30-800 mm/s. It provides a computed safe working load of about 241 N, translating to a vertical lift capacity of roughly 20.5 kg with a 2:1 safety margin. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10 Is Used
Package Diverting Gate
Shifts a heavy sorting gate on a packaging line, using the 10 mm extend trim to fine-tune the diversion angle while the dual air cushions absorb the impact of fast 402.2 N strokes.
Pallet Stopper Block
Halts loaded pallets on a gravity roller conveyor; the adjustable forward stop dials in the exact contact point, and the needle cushion decelerates the 20.5 kg load safely.
Clamp Press Positioning
Drives a secondary clamping head in an assembly press, using the 65-75 mm extend window to set the exact clamping depth without reprogramming the machine cycle.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10 the Right Cylinder?
At 0.5 MPa this 32 mm bore yields 402.2 N push and 345.6 N pull. If you need less force, the 25 mm bore offers 245.3 N push; stepping up to the 40 mm bore provides 628.3 N. Choose this model when you need to set a precise extend position quickly and decelerate heavy fast moves. Remember the stop screw sets the end position but is not a mid-stroke lock, and the air cushion only decelerates. To hold a load on air loss, install an external rod lock or pilot check valve.
Mount using LB foot, FA flange, or TC trunnion brackets, plus CA/U/R/CM back covers. The SDB pivot block is not available on this adjustable variant. Because this specific SKU has no magnet (-S), it cannot support position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10 FAQ
This double-acting cylinder uses a 1/8" air port and a 12 mm piston rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm on-site, while needle valves adjust the variable air cushions at both ends to absorb high-speed shock. The cushion only decelerates near the end of travel and does not lock the piston; for load holding on air loss, use an external rod lock. This non-magnet SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X75-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.