Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10
Dial in a precise forward stop on-site with the AirTAC MICJ32X80-10, a double-acting round-body stainless steel mini cylinder. An external screw shortens the extend stroke by up to 10 mm, giving a usable 70-80 mm forward range, while a needle-adjustable air cushion at both ends absorbs high-speed shock. The Ø32 mm bore delivers 402.2 N of push force at 0.5 MPa, making it robust enough for heavier tooling.
Built with a stainless barrel and rod for mild washdown resistance, this model features a 1/8" port and an M10x1.25 male rod thread. It yields a safe working load of about 241 N and can vertically lift roughly 20.5 kg with a 2:1 safety margin. Note that this non-magnetic SKU cannot accept position sensors; adding the -S variant enables CMSG, DMSG, or EMSG switches.
Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10 Is Used
Adjustable Stamping Press
Delivers 402.2 N to seat components, using the 10 mm extend trim to set exact contact depth without swapping tooling.
High-Speed Diverter
Cycles at speed while the dual adjustable air cushions absorb end-of-stroke shock, protecting the 32 mm bore assembly.
Vertical Lift Gate
Lifts roughly 20.5 kg safely, relying on the external stop screw to set the precise 70-80 mm opening position.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10 the Right Cylinder?
When sizing this 32 mm bore, stepping down to a 25 mm model drops the push force to 245.3 N, while stepping up to a 40 mm bore increases it to 628.3 N at 0.5 MPa. Choose this 80 mm unit when you need 402.2 N of push combined with on-the-fly extend tuning and high-speed cushioning. The external screw sets the end position but does not lock the piston mid-stroke; if you need to hold a vertical load against air loss, add an external rod lock or pilot check valve.
Mounting options include LB foot, FA flange, and TC trunnion, but the SDB pivot block is not available on this adjustable-stroke variant. Because this specific SKU lacks the internal magnet, it cannot support magnetic sensing—select the -S version if your application requires CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10 FAQ
This 32 mm bore cylinder uses a 1/8" port and generates 402.2 N push and 345.6 N pull at 0.5 MPa. At 0.7 MPa it provides 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, setting the forward end position without acting as a mid-stroke lock. Needle valves adjust the air cushions at both ends to decelerate the piston at high speed. This non-S SKU has no magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X80-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.