Airtac MIJ Adjustable Cylinder MIJ10X10-10
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X10-10 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X10-10
Dial in your forward end position on-site with the AirTAC MIJ10X10-10, a round-body stainless steel mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you trim the forward stroke by up to 10 mm to absorb setup tolerances, while the retract stroke remains full length. This double-acting actuator delivers 39.3 N of push force at 0.5 MPa, making it a solid fit for light-duty positioning tasks.
Built with a riveted stainless barrel and a Ø4 mm piston rod, it resists mild corrosion and handles washdown environments. It uses the ISO 6432 mounting interface for standard mini brackets and features an M5×0.8 port. With fixed TPU bumper pads decelerating the stroke end, it provides a safe working load of about 24 N, capable of vertically lifting roughly 2 kg with a 2:1 margin.
Airtac MIJ Adjustable Cylinder MIJ10X10-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X10-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X10-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X10-10 Is Used
Light-Part Ejection
Uses the 39.3 N push force to eject small plastic mouldings, with the 10 mm stop screw trimming the extend position to avoid marking delicate parts.
Staged Feeding
Indexes thin cardboard blanks in a packaging line, relying on the adjustable forward end to dial in the exact push distance for different carton sizes.
Sensor Triggering
Provides a 2 kg vertical lift margin to press micro-switches or delicate levers, fine-tuning the contact travel via the external stop nut.
Is the Airtac MIJ Adjustable Cylinder MIJ10X10-10 the Right Cylinder?
When sizing this 10 mm bore, step down to an MIJ8 if your load is extremely light (25.1 N push @0.5 MPa), or move up to an MIJ12 (56.5 N push @0.5 MPa) if you need more authority. The 10 mm adjustment screw is ideal for taking up mechanical tolerances during changeovers without swapping parts. Remember that the stop screw only sets the end position; it is not a mid-stroke lock, and the piston will drift on air loss, so add an external pilot check valve if you must hold a load. You can use LB, FA, or TC mounts (SDB is unavailable here), but note this SKU lacks a magnet, so CMSG/DMSG/EMSG sensors cannot be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X10-10 FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull; at 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. This bore features an M5×0.8 air port and a Ø4 mm rod with an M4×0.7 male thread.
An external stop screw shortens the extend stroke by up to 10 mm on-site, letting you set the exact forward position without changing the cylinder; retract remains full. This specific SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors. It also uses fixed TPU bumper pads rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.