Airtac MIJ Adjustable Cylinder MIJ10X10-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X10-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X10-10S
Dial in a precise forward end position on-site with the AirTAC MIJ10X10-10S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 10 mm, allowing one unit to cover several forward stops without swapping hardware. Retract remains at the full stroke length.
The Ø10 mm bore generates 39.3 N of push force at 0.5 MPa, yielding a safe working load of roughly 24 N or a 2 kg vertical lift with a 2:1 margin. It features a Ø4 mm piston rod, an M5×0.8 port, and an M4×0.7 male rod thread. The stainless barrel and rod resist mild corrosion and washdown. Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ10X10-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X10-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X10-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X10-10S Is Used
Micro-Clamp Actuation
Provides 39.3 N of push force to secure delicate electronic components, using the 10 mm extend adjustment to dial in the exact clamping depth without crushing parts.
Staged Parts Ejection
Tunes the forward stop to nudge lightweight plastic widgets out of a mold cavity by up to 10 mm, adapting to different part heights on the fly.
Sensor Flag Positioning
Leverages the built-in -S magnet and CMSG switches to confirm end-of-stroke, while the stop screw fine-tunes the extend position to trigger downstream logic precisely.
Is the Airtac MIJ Adjustable Cylinder MIJ10X10-10S the Right Cylinder?
For lighter duty, the Ø8 mm MIJ bore provides 25.1 N push at 0.5 MPa, whereas stepping up to the Ø12 mm MIJ yields 56.5 N. This Ø10 mm unit is ideal when you need 39.3 N push combined with on-the-fly tolerance take-up during changeovers. The external adjuster trims the extend end only; it is not a mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load. You can mount via LB foot, FA flange, or TC trunnion (SDB is unavailable), and the ISO 6432 interface drops into standard mini brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X10-10S FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull; at 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. This model uses an M5×0.8 air port and a Ø4 mm rod with an M4×0.7 male thread.
An external stop screw shortens the extend stroke by up to 10 mm on-site, letting you set the exact forward position without changing the cylinder; retract remains full. The included -S magnet enables CMSG, DMSG, or EMSG sensors for position detection, and the fixed TPU bumper pads decelerate the stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.