Airtac MIJ Adjustable Cylinder MIJ10X100-100S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X100-100S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X100-100S
Dial in a precise forward end position on-site with the AirTAC MIJ10X100-100S, a round-body stainless steel mini cylinder built for double-acting service. An external stop screw lets you shorten the extend stroke by up to 100 mm, allowing one part number to cover several forward stops without swapping hardware. The retract stroke remains full length. Because this is a Ø10 bore, it drops directly into standard ISO 6432 mini-cylinder mounting interfaces.
The stainless barrel and Ø4 mm piston rod supply mild corrosion resistance for washdown or humid settings. Operating at 0.5 MPa, it delivers 39.3 N of push force and 33 N of pull force, translating to a safe working load of roughly 24 N or a 2 kg vertical lift with a 2:1 margin. Air connects via an M5x0.8 port, and the fixed TPU bumper pads decelerate the stroke ends. The -S suffix means a piston magnet is installed for CMSG, DMSG or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ10X100-100S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X100-100S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X100-100S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X100-100S Is Used
Changeover Dial-In
Rotate the external stop screw to shift the extend end position up to 100 mm during product changeovers, letting the 39.3 N push force adapt to different part lengths without changing cylinders.
Staged Feed Ejection
Set a precise forward stop to push lightweight components off a line, using the 2 kg safe vertical lift capacity to clear parts before the cylinder retracts for the next cycle.
Lab Dispense Positioning
Leverage the stainless build and M5x0.8 port for humid lab environments, using the adjustable extend stroke to fine-tune the exact distance a dispense head travels into a vessel.
Is the Airtac MIJ Adjustable Cylinder MIJ10X100-100S the Right Cylinder?
When sizing this Ø10 bore, compare it directly with the adjacent options. If you need less force, there is no smaller MIJ bore, so you must look outside the series. If your fixture requires more push, step up to the Ø16 bore, which provides 100.5 N of push at 0.5 MPa. The 100 mm adjustment window on this unit is ideal for taking up mechanical tolerances or staging feeds across changeover jobs.
Remember that the external screw sets the extend end position but acts purely as a stop, not a mid-stroke lock. The piston will drift if air pressure is lost, so add an external rod lock or pilot check valve for held loads. For mounting, you can use LB foot, FA flange or TC trunnion brackets, but the SDB pivot block is not available on this adjustable variant. Position sensing requires the -S magnet already specified here.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X100-100S FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port size is M5x0.8.
An external stop screw shortens the extend stroke by up to 100 mm on-site, but the retract stroke remains full length. The screw is an end stop, not a mid-stroke lock. The -S suffix indicates a built-in piston magnet for use with CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X100-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.