Airtac MIJ Adjustable Cylinder MIJ10X100-30S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X100-30S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X100-30S
Dial in a precise forward end position on-site with the AirTAC MIJ10X100-30S, a double-acting round-body mini cylinder featuring a 30 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 100 mm nominal length down to 70 mm, absorbing setup tolerances without changing the cylinder. The retract stroke remains full length. Built with a stainless-steel barrel and Ø4 mm piston rod, it handles mild corrosion and washdown environments.
This Ø10 mm bore generates 39.3 N of push force at 0.5 MPa, yielding a safe working load of roughly 24 N (about 60% of the rated push). That translates to vertically lifting approximately 2 kg with a 2:1 safety margin. It conforms to the ISO 6432 mounting interface for standard mini brackets, uses an M5x0.8 port, and includes a piston magnet (-S) for CMSG, DMSG, or EMSG sensor switches. Fixed TPU bumper pads decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ10X100-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X100-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X100-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X100-30S Is Used
Light-Part Diverter
Tunes the extend stop to deflect small, lightweight packages on a belt without knocking them over, using the 24 N safe working load.
Adjustable Stop Gate
Sets a precise 70 to 100 mm forward barrier for staging cartons of varying widths, easily dialing in the position during product changeovers.
Micro-Clamp Actuator
Provides delicate clamping force for small assemblies, using the external screw to compensate for part thickness variations on the fly.
Is the Airtac MIJ Adjustable Cylinder MIJ10X100-30S the Right Cylinder?
When sizing this Ø10 mm unit against the broader range, stepping down to an Ø8 mm bore drops the 0.5 MPa push force to 25.1 N, while moving up to a Ø16 mm bore increases it substantially to 100.5 N. Choose this model when your application needs about 24 N of safe working force and benefits from on-the-fly forward-end tuning. The 30 mm adjuster is ideal for taking up mechanical tolerances during changeovers, but remember it only trims the extend stroke; retract remains fixed.
This cylinder does not hold position on air loss—the piston will drift, as the stop screw and bumpers only manage the end of travel, not mid-stroke locking. For holding a load, install an external rod lock or pilot check valve. Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available on this adjustable variant). Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X100-30S FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
An external stop screw shortens the extend stroke by up to 30 mm on-site, letting you set the exact forward end position without swapping parts. The retract stroke remains full length. The -S suffix indicates a built-in piston magnet for use with CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X100-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.