Airtac MIJ Adjustable Cylinder MIJ10X100-50S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X100-50S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X100-50S
Dial in a precise forward end position on-site with the AirTAC MIJ10X100-50S, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild corrosion resistance. An external stop screw lets you shorten the extend stroke by up to 50 mm from its 100 mm nominal length, allowing one part number to cover several forward stops without swapping hardware. Retract remains full stroke.
Operating at 30-800 mm/s, this Ø10 bore generates 39.3 N of push force at 0.5 MPa, translating to a safe working load of about 24 N or a 2 kg vertical lift with a 2:1 margin. The M5x0.8 port and M4x0.7 male rod thread simplify integration. Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG sensors for position feedback.
Airtac MIJ Adjustable Cylinder MIJ10X100-50S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X100-50S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X100-50S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X100-50S Is Used
Light Part Ejection
Use the adjustable 50 mm extend window to fine-tune the ejection angle of small plastic parts without reprogramming machine logic.
Staged Sorting Diverter
Shift lightweight packages on a conveyor with a 24 N safe working load, dialing the forward stop to match varying box widths.
Sensor-Checked Clamping
Secure delicate electronic components using the -S magnet with a DMSG sensor, tweaking the extend end to prevent crushing.
Is the Airtac MIJ Adjustable Cylinder MIJ10X100-50S the Right Cylinder?
When sizing this 10 mm bore against adjacent options, note the MIJ8 provides 25.1 N push at 0.5 MPa while the MIJ12 offers 56.5 N. The adjustable stop screw is ideal for absorbing mechanical tolerances or staging feeds during setup. Remember that the stop screw sets the end position but does not act as a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load.
This model drops into standard mini brackets and clevises via its ISO 6432 mounting interface. You can use LB foot, FA flange, or TC trunnion mounts, but the SDB pivot-block is not available on this adjustable variant. The included -S magnet enables electronic and reed switch sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X100-50S FAQ
This cylinder features an M5x0.8 port and delivers 39.3 N push / 33 N pull at 0.5 MPa, and 55 N push / 46.1 N pull at 0.7 MPa. The theoretical maximum force is 8 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50 mm on-site, giving a usable forward range of 50-100 mm. The retract stroke remains full. The -S magnet enables CMSG/DMSG/EMSG sensors, and the stainless build resists mild washdown.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X100-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.