Airtac MIJ Adjustable Cylinder MIJ10X130-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X130-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 130mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke130 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X130-10S
Dial in a precise forward end position on-site with the AirTAC MIJ10X130-10S, a round-body stainless steel mini cylinder featuring a 10 mm external adjustment screw that shortens the extend stroke from its 130 mm nominal length down to 120 mm. Because the adjuster trims only the extend end, you get one part number covering several stops without swapping hardware, while retract remains a full stroke. The riveted stainless barrel and Ø4 mm rod resist mild corrosion and washdown environments.
Built to the ISO 6432 mounting interface, this double-acting actuator delivers 39.3 N of push force at 0.5 MPa, translating to a safe working load of roughly 24 N or a vertical lift of about 2 kg with a 2:1 margin. The -S suffix denotes a built-in piston magnet for CMSG, DMSG or EMSG switches, and the M5×0.8 port supplies air efficiently across the 30-800 mm/s speed range.
Airtac MIJ Adjustable Cylinder MIJ10X130-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X130-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 130 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X130-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X130-10S Is Used
Light-Part Escapement
Stage small plastic components on a belt by dialing the extend stroke between 120 and 130 mm, using the 39.3 N push force to index parts without crushing them.
Packaging Deflector
Tune the exact push distance on a washdown packaging line, relying on the stainless construction and 2 kg vertical lift margin to pivot light cardboard flaps.
Sensor Probe Positioning
Move a testing probe into contact with delicate electronics, adjusting the forward stop in the field to compensate for fixture tolerances while monitoring position via the built-in magnet.
Is the Airtac MIJ Adjustable Cylinder MIJ10X130-10S the Right Cylinder?
When sizing this 10 mm bore, step down to an MIJ8 if your payload is under 25 N push at 0.5 MPa, or step up to an MIJ16 (100.5 N push) if you need to overcome significant friction. The 10 mm adjust window is ideal for taking up mechanical tolerances during setup or staging feeds, letting you fine-tune the 120-130 mm extend length without machining spacers. Remember the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange or TC trunnion (SDB is unavailable), and use the -S magnet to fit your chosen sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X130-10S FAQ
This double-acting cylinder uses an M5×0.8 port and generates 39.3 N push / 33 N pull at 0.5 MPa, 55 N push / 46.1 N pull at 0.7 MPa, with a theoretical max of 8 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm (usable extend 120-130 mm), setting the forward end position without affecting the full retract. The -S suffix means it has a built-in piston magnet for CMSG, DMSG or EMSG sensors; fixed TPU bumper pads decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.