Airtac MIJ Adjustable Cylinder MIJ10X15-10
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X15-10 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X15-10
Dial in a precise forward end position on the spot with this stainless-steel round-body mini cylinder. The external stop screw trims the extend stroke by up to 10 mm, yielding a usable 5 to 15 mm forward travel, so you can absorb setup tolerances without swapping hardware. Retract travel remains fixed at the full 15 mm.
Built to the ISO 6432 mounting interface for standard mini brackets, the Ø10 mm bore generates 39.3 N of push force at 0.5 MPa. This translates to a safe working load of roughly 24 N, or a vertical lift of about 2 kg with a 2:1 margin. The M5x0.8 port and fixed TPU bumper pads ensure reliable, repeatable deceleration for light-duty cycling.
Airtac MIJ Adjustable Cylinder MIJ10X15-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X15-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X15-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X15-10 Is Used
Micro-Clamp Actuation
Provides 39.3 N of push to secure delicate electronic components, using the 10 mm stroke adjuster to dial in the exact clamping depth without crushing parts.
Light-Duty Diverter
Sorts small plastic bottles on a packaging line; the adjustable forward stop lets operators reposition the deflector finger quickly during product changeovers.
Staged Parts Feeding
Pushes lightweight plastic caps into a staging area, trimming the extend stroke by up to 10 mm to accommodate varying cap heights on the fly.
Is the Airtac MIJ Adjustable Cylinder MIJ10X15-10 the Right Cylinder?
For lighter duty, the Ø8 mm MIJ bore drops to 25.1 N push at 0.5 MPa, whereas stepping up to the Ø12 mm bore raises push force to 56.5 N. This Ø10 mm model hits a practical middle ground at 39.3 N. The on-site adjustability is perfect for changeover jobs where you need to tune the forward stop within a 10 mm window. Remember that the stop screw sets the end position but acts as no mid-stroke lock; the piston will drift on air loss, so fit an external pilot check valve if you must hold a load. Mounting options include LB foot, FA flange, and TC trunnion (the SDB pivot block is not offered on this adjustable variant). Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X15-10 FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull; at 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
An external stop screw shortens the extend stroke by up to 10 mm on-site (retract remains full). The screw only sets the end position; it is not a mid-stroke lock, and the cylinder drifts on air loss. This non-S SKU also lacks a magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X15-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.