Airtac MIJ Adjustable Cylinder MIJ10X15-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X15-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X15-10S
Dial in a precise forward end position on-site with the AirTAC MIJ10X15-10S, a round-body stainless steel mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel from its 15 mm nominal length down to 5 mm, absorbing setup tolerances without swapping hardware. Retract travel remains full length, and the screw strictly sets the endpoint rather than locking the piston mid-stroke.
Built with a stainless barrel and rod for mild washdown resistance, this double-acting unit delivers 39.3 N of push force at 0.5 MPa. That translates to a safe working load of about 24 N, or roughly a 2 kg vertical lift with a 2:1 safety margin. It conforms to the ISO 6432 mounting interface for standard mini brackets, uses an M5x0.8 air port, and includes a built-in magnet (-S) for CMSG, DMSG, or EMSG sensors. Fixed TPU bumper pads decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ10X15-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X15-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X15-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X15-10S Is Used
Micro-Clamp Actuation
Provides 39.3 N of push force to secure delicate electronic components, with the 10 mm stop screw allowing operators to fine-tune the clamp depth and prevent part damage.
Small Part Ejection
Ejects lightweight molded parts from a fixture, using the adjustable forward stop to dial in the exact ejection distance needed for varying product sizes on the same line.
Lab Dispenser Positioning
Moves a dispensing nozzle with a safe working load of roughly 24 N, relying on the stainless build for mild corrosion resistance and the adjustable stop for precise fluid delivery points.
Is the Airtac MIJ Adjustable Cylinder MIJ10X15-10S the Right Cylinder?
When sizing this 10 mm bore, step down to an MIJ8 if your load is under 25.1 N push at 0.5 MPa, or step up to an MIJ16 if you need 100.5 N. The 10 mm adjustability is highly useful for changeover jobs, letting one part number cover several forward stops. Just remember the stop screw is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load.
Mounting options include LB foot, FA flange, and TC trunnion brackets, plus CA, U, R, or CM back covers. Note that the SDB pivot block is not available on this adjustable variant. Because this is the -S version, you can directly mount CMSG, DMSG, or EMSG switches to the cylinder body for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X15-10S FAQ
This double-acting cylinder uses an M5x0.8 air port and generates 39.3 N push and 33 N pull at 0.5 MPa. At 0.7 MPa, it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, giving a usable forward range of 5 to 15 mm; retract remains full stroke. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Fixed TPU bumper pads decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X15-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.