Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB
Dial in your forward end position on-site with the AirTAC MIJ10X15-10SLB, a round-body stainless steel mini cylinder featuring a 10mm extend-stroke adjustment window. An external stop screw lets you trim the forward travel down from the 15mm nominal stroke, allowing one part number to cover several stop distances. Retract travel remains full length. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG position sensing.
Built with a riveted stainless barrel and rod for mild washdown resistance, this double-acting unit conforms to the ISO 6432 mounting interface for easy bracket drops. The Ø10mm bore delivers 39.3N of push force at 0.5MPa, yielding a safe working load of about 24N or a 2kg vertical lift with a 2:1 margin. It uses an M5x0.8 port and fixed TPU bumper pads to decelerate the stroke end.
Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB Is Used
Probe Positioning
Set the exact forward reach of a testing probe on small assemblies, using the 10mm adjuster to compensate for tip wear without remachining stops.
Light Diverter Gate
Tune the push distance of a lightweight sorting flap to handle varying package widths on the fly, operating safely within the 39.3N push limit.
Small Part Ejection
Trim the ejector stroke precisely to nudge delicate plastic components out of a mold cavity without stressing the parts.
Is the Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB the Right Cylinder?
When sizing this actuator, step down to the Ø8mm bore if your load requires under 25N of push force, or step up to the Ø16mm bore—which pushes 100.5N at 0.5MPa—if you need to overcome higher friction. The 10mm external adjuster is ideal for taking up mechanical tolerances during setup. Foot mounting (LB) is included, while the SDB pivot block is not offered on this adjustable variant.
Remember that the stop screw sets the end position but acts as no mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve if you must hold a vertical load. The included magnet enables solid-state or reed sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB FAQ
At 0.5MPa it pushes 39.3N and pulls 33N; at 0.7MPa it pushes 55N and pulls 46.1N. The theoretical maximum is 8kgf at 1.0MPa. The air port is M5x0.8.
An external stop screw shortens the extend stroke by up to 10mm, letting you set the forward end position; retract remains full. The -S suffix means a piston magnet is built-in for CMSG/DMSG/EMSG sensors. Fixed TPU bumpers decelerate the ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X15-10SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.