Airtac MIJ Adjustable Cylinder MIJ10X15-20
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X15-20 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X15-20
Trim the forward end position by up to 20 mm on site with the AirTAC MIJ10X15-20, a round-body stainless steel mini cylinder built for double-acting service. An external stop screw lets you dial in the exact extend stop without swapping parts, while the retract stroke remains full. The M5x0.8 port feeds a Ø4 mm piston rod, yielding 39.3 N of push force at 0.5 MPa.
This riveted construction uses a stainless barrel and rod to resist mild corrosion and washdown environments. It conforms to the ISO 6432 mounting interface for standard mini brackets. As a computed buyer insight, the safe working load is roughly 24 N, meaning it can vertically lift about 2 kg with a 2:1 safety margin. Fixed TPU bumper pads decelerate the stroke ends, operating at speeds of 30-800 mm/s.
Airtac MIJ Adjustable Cylinder MIJ10X15-20 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X15-20 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X15-20
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X15-20 Is Used
Gauge Positioning
Dial in the exact extend stop up to 20 mm to push a measuring gauge into contact with delicate parts without over-traveling.
Light Transfer
Move small electronic components weighing up to 2 kg vertically or horizontally using the 39.3 N push force at 0.5 MPa.
Changeover Jobs
Quickly readjust the forward end position on packaging lines during product changeovers instead of physically swapping cylinders.
Is the Airtac MIJ Adjustable Cylinder MIJ10X15-20 the Right Cylinder?
When sizing this bore, step down if the load is very light or step up to the Ø16 bore if you need 100.5 N of push at 0.5 MPa for heavier slides. The 20 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds during changeovers. Because this SKU lacks a magnet, it cannot take CMSG, DMSG, or EMSG sensors; you would need the -S variant for position detection. Mount via LB foot, FA flange, or TC trunnion, noting the SDB pivot block is not offered on this adjustable type. Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so use an external rod lock or pilot check valve to hold a load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X15-20 FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull, increasing to 55 N push and 46.1 N pull at 0.7 MPa. The theoretical maximum is 8 kgf at 1.0 MPa, and the air port is M5x0.8.
An external stop screw shortens the extend stroke by up to 20 mm on site, while the retract stroke remains full. This specific SKU has no magnet and cannot take sensors; the -S variant adds a magnet for CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X15-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.