Airtac MIJ Adjustable Cylinder MIJ10X25-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X25-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 25mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X25-10S
Trimming the forward end by up to 10 mm via an external stop screw, the AirTAC MIJ10X25-10S lets you dial in the exact extend position from 15 to 25 mm without swapping hardware. This double-acting, round-body stainless steel mini cylinder conforms to ISO 6432 mounting dimensions, dropping neatly into standard mini brackets and clevises while resisting mild washdown corrosion.
At 0.5 MPa it pushes with 39.3 N and pulls with 33 N, yielding a safe working load of roughly 24 N or a 2 kg vertical lift with a 2:1 margin. The M5x0.8 port and Ø4 mm male M4x0.7 rod thread keep the envelope compact, and the included -S piston magnet supports CMSG, DMSG or EMSG sensors for position confirmation. Fixed TPU bumpers decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ10X25-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X25-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 25 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X25-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X25-10S Is Used
Micro-Positioning Stops
Dial in the 15-25 mm extend reach to act as a hard stop for small electronic components, absorbing setup variances with a 39.3 N push force.
Staged Diverting Gates
Fine-tune the gate extension by up to 10 mm on-site to route thin packages precisely without changing the cylinder body.
Light-Duty Ejector Pins
Eject lightweight molded parts using a safe working load of 24 N, adjusting the forward pin position to match varying mold depths.
Is the Airtac MIJ Adjustable Cylinder MIJ10X25-10S the Right Cylinder?
For lighter duty, the Ø8 bore lowers the 0.5 MPa push force to 25.1 N, whereas stepping up to a Ø16 bore raises it to 100.5 N if your fixture needs more authority. The 10 mm adjustment window on this Ø10 model is perfect for taking up mechanical tolerances or staggering part ejection across a row of cylinders. Because the stop screw only trims the extend end, retract remains full.
Mount using LB foot, FA flange or TC trunnion brackets (the SDB pivot block is not offered on this adjustable variant). Remember that the bumper pads decelerate the stroke but do not lock the rod; if air pressure drops, the piston will drift, so fit an external pilot check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X25-10S FAQ
This double-acting cylinder features an M5x0.8 air port. At 0.5 MPa it pushes with 39.3 N and pulls with 33 N. At 0.7 MPa it pushes with 55 N and pulls with 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm, letting you set the forward end position while retract remains full stroke. The -S suffix means it has a built-in piston magnet for CMSG, DMSG or EMSG sensors. The stop screw is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X25-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.