Airtac MIJ Adjustable Cylinder MIJ10X25-20
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X25-20 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 25mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X25-20
Trimming the forward end by up to 20 mm via an external stop screw, this double-acting stainless mini cylinder lets you dial in the exact forward position on-site without swapping hardware. The retract stroke remains full, while the extend travel is adjustable down to a 5 mm working distance. Built with a round-body riveted stainless barrel and rod, it handles mild washdown and corrosion exposure well.
Operating at 0.5 MPa, it delivers 39.3 N of push force and 33 N of pull force. For practical sizing, this translates to a safe working load of about 24 N, or vertically lifting roughly 2 kg with a 2:1 safety margin. It conforms to the ISO 6432 mounting interface for standard mini brackets, runs at 30-800 mm/s, and uses an M5x0.8 air port with an M4x0.7 male rod thread.
Airtac MIJ Adjustable Cylinder MIJ10X25-20 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X25-20 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 25 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X25-20
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X25-20 Is Used
Sensor Probe Gauging
Set the exact 5 to 25 mm extend distance for a delicate testing probe, using the stop screw to fine-tune the approach against varied part heights.
Light Part Ejection
Push small plastic components out of a mold cavity, relying on the 39.3 N @0.5 MPa push force and adjusting the stroke to prevent over-travel.
Staged Feed Stops
Act as an adjustable flight stop on a small conveyor, trimming the 20 mm extend window to match different product widths during line changeovers.
Is the Airtac MIJ Adjustable Cylinder MIJ10X25-20 the Right Cylinder?
When sizing this 10 mm bore, the smaller MIJ8 offers 25.1 N push @0.5 MPa, while the larger MIJ12 provides 56.5 N. The 20 mm adjustment window is highly useful for taking up mechanical tolerances during setup or staging feeds across changeover jobs. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors; you would need the -S variant for position detection.
Mounting options include LB foot, FA flange, and TC trunnion brackets, but the SDB pivot block is not available on this adjustable-stroke type. Keep in mind the stop screw only sets the extend endpoint and does not lock the piston mid-stroke; the cylinder will drift on air loss. For holding a load securely, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X25-20 FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
An external stop screw shortens the extend stroke by up to 20 mm on-site, while retract remains full. This screw sets the end position but is not a mid-stroke lock. Because this specific SKU lacks a magnet, it cannot accept CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X25-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.