Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 30mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB
Dial in a precise forward end position on-site with the AirTAC MIJ10X30-10SLB, a round-body stainless steel mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw shortens the forward stroke by up to 10 mm, letting you cover multiple stop distances with a single part number. The retract stroke remains full length. Built with a riveted stainless barrel and Ø4 mm rod, it handles mild washdown environments and conforms to the ISO 6432 mounting interface for standard mini brackets.
At 0.5 MPa, this double-acting bore generates 39.3 N of push force and 33 N of pull force, yielding a safe working load of about 24 N or a 2 kg vertical lift with a 2:1 margin. The M5x0.8 port and M4x0.7 male rod thread keep the envelope compact. Because this SKU includes the -S magnet, it is ready for CMSG, DMSG, or EMSG position sensing. Fixed TPU bumper pads decelerate the stroke ends across the 30-800 mm/s speed range.
Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 30 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB Is Used
Light-Duty Part Ejection
Uses the 39.3 N push force to knock small plastic parts from a mold, with the 10 mm extend adjustment dialing in the exact knockout distance without swapping cylinders.
Staged Package Sorting
Diverts lightweight envelopes on a conveyor; the on-site stop screw fine-tunes the pusher end position to handle varying box widths during changeover.
Sensor Actuation Trigger
Leverages the built-in -S magnet and CMSG switches to confirm part presence, using the adjustable forward stop to trigger a probe at varying depths.
Is the Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB the Right Cylinder?
When sizing this 10 mm bore, compare it directly with adjacent options: the smaller Ø8 bore yields 25.1 N push at 0.5 MPa, while the larger Ø12 bore provides 56.5 N. Choose this model when your application demands roughly 24 N of safe working force and benefits from trimming the extend stroke up to 10 mm to absorb mechanical tolerances during setup. The included LB foot mounting secures the body firmly, though the SDB pivot block is not offered on this adjustable variant.
Remember that the external stop screw sets the forward end position but acts purely as a mechanical stop, not a mid-stroke lock. If your machine loses air pressure, the piston will drift, and the fixed TPU bumpers only soften the impact near the stroke ends. To maintain vertical load holding, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB FAQ
This double-acting cylinder uses an M5x0.8 air port and generates 39.3 N push / 33 N pull at 0.5 MPa, and 55 N push / 46.1 N pull at 0.7 MPa. The theoretical maximum force is 8 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, while the retract stroke remains full length. The -S suffix indicates a built-in piston magnet for use with CMSG, DMSG, or EMSG sensors; a non-S SKU cannot accept switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X30-10SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.