Airtac MIJ Adjustable Cylinder MIJ10X30-20S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X30-20S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 30mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X30-20S
Dial in exact forward end positions on-site with the AirTAC MIJ10X30-20S, a round-body stainless steel mini cylinder featuring a 20mm adjustable extend window. An external stop screw lets you trim the forward stroke from its 30mm nominal length down to 10mm without swapping parts, while retract remains full. This double-acting actuator delivers 39.3N of push force at 0.5MPa, yielding a safe working load of about 24N or a 2kg vertical lift with a 2:1 margin.
Built with a riveted stainless barrel and rod, the unit resists mild corrosion and washdown environments. It conforms to the ISO 6432 mounting interface for standard mini brackets and includes a built-in magnet (-S) for CMSG, DMSG, or EMSG sensors. The M5x0.8 port and M4x0.7 male rod thread keep the envelope compact, while fixed TPU bumper pads absorb end-of-stroke impacts.
Airtac MIJ Adjustable Cylinder MIJ10X30-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X30-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 30 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X30-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X30-20S Is Used
Micro-Clamp Actuation
Drives small assembly clamps with a 24N safe working load, using the 20mm stroke adjustment to dial in exact clamping depth without machining spacers.
Staged Part Routing
Sorts lightweight items on a conveyor by extending a 10mm stopper finger, relying on the 2kg vertical lift capacity and fine-tuned forward end position.
PCD Pin Insertion
Pushes delicate pins into electronic connectors, using the adjustable extend stroke to compensate for stack-up tolerances and prevent over-travel.
Is the Airtac MIJ Adjustable Cylinder MIJ10X30-20S the Right Cylinder?
This Ø10 bore provides 39.3N push at 0.5MPa; if your setup needs less force, drop down to the Ø8 MIJ (25.1N push), or step up to the Ø12 MIJ (56.5N push) for heavier moves. The 20mm external adjuster is perfect for taking up mechanical tolerances or staging feeds, letting one part number cover several stop distances. Remember the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable here), and use the -S magnet for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X30-20S FAQ
At 0.5MPa it provides 39.3N push and 33N pull; at 0.7MPa it provides 55N push and 46.1N pull. The theoretical maximum force is 8kgf at 1.0MPa. This bore uses an M5x0.8 air port and an M4x0.7 male rod thread.
An external stop screw shortens the extend stroke by up to 20mm on-site, letting you set a precise forward end position while retract remains full. The included -S magnet enables CMSG, DMSG, or EMSG sensors for position detection. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X30-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.