Airtac MIJ Adjustable Cylinder MIJ10X40-10
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X40-10 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 40mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke40 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X40-10
With a 10 mm bore delivering 39.3 N push at 0.5 MPa, this MIJ10X40-10 is a compact round-body stainless mini cylinder. Its external stop screw trims the extend stroke by up to 10 mm on site, letting you fine-tune the forward end position from 30 to 40 mm without changing the unit. The stainless barrel and rod resist mild corrosion, making it suitable for light washdown areas.
This double-acting cylinder uses the ISO 6432 mounting interface for standard mini brackets and clevises. The M5x0.8 port and M4x0.7 male rod thread suit small automation frames. With a safe working load around 24 N, it handles light pushing tasks. Fixed TPU bumpers soften the stroke end, and the unit operates from 30 to 800 mm/s.
Airtac MIJ Adjustable Cylinder MIJ10X40-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X40-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 40 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X40-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X40-10 Is Used
Fixture Stop Positioning
Set the forward stop on a light fixture locator by turning the screw, eliminating shims. The 39.3 N push at 0.5 MPa suits small part registration in assembly jigs.
Length Compensation
Adjust the extend stroke to compensate for part length variation in a sorting gate. The 10 mm window covers tolerance bands without reprogramming or cylinder swaps.
Changeover Reconfiguration
Switch between two product sizes by turning the stop screw instead of changing hardware. The 33 N pull at 0.5 MPa retracts the actuator fully for the next cycle.
Is the Airtac MIJ Adjustable Cylinder MIJ10X40-10 the Right Cylinder?
For a smaller footprint, the MIJ8X40-10 offers 25.1 N push at 0.5 MPa; for more force, the MIJ12X40-10 provides 56.5 N. The adjustable stop helps when you need to set a precise forward position for tolerance take-up or changeover setups. This SKU has no magnet, so it cannot accept a sensor; choose the -S variant for CMSG/DMSG/EMSG switches. Mount with LB foot, FA flange, or TC trunnion; SDB pivot blocks are not available. The stop screw sets the end position but does not lock the load-use an external rod lock if holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X40-10 FAQ
At 0.5 MPa, push is 39.3 N and pull is 33 N. At 0.7 MPa, push is 55 N and pull is 46.1 N. Theoretical maximum force is 8 kgf at 1.0 MPa. Operating pressure range is 0.15 to 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm, giving a usable extend range of 30 to 40 mm. Retract is always full. The screw sets the end position but is not a mid-stroke lock. This SKU has no magnet, so magnetic sensors cannot be used; the -S variant enables CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X40-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.