Airtac MIJ Adjustable Cylinder MIJ10X50-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X50-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X50-10S
Trimming the forward end position by up to 10 mm on-site, this double-acting stainless mini cylinder lets you fine-tune the extend stroke from 40 to 50 mm without swapping parts. The external stop screw shortens the forward travel only, while retract remains full. Built with a riveted round body and a Ø4 mm piston rod, it provides 39.3 N of push force at 0.5 MPa, making it suitable for light-duty positioning. The M5x0.8 air port keeps the envelope compact.
The stainless-steel barrel and rod offer mild corrosion resistance for washdown environments, and the built-in magnet (-S) supports CMSG, DMSG, or EMSG sensors for end-of-stroke confirmation. It uses the ISO 6432 mounting interface for standard mini brackets. For a safe working load, expect around 24 N (about 60% of the 0.5 MPa push force), which translates to lifting roughly 2 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ10X50-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X50-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X50-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X50-10S Is Used
Light-Part Ejection
Pushes small plastic or aluminum components off a belt with 39.3 N of force, using the 10 mm stroke adjustment to dial in the exact drop distance for different product sizes.
Sensor Probe Positioning
Advances a testing probe into position; the adjustable forward stop allows operators to compensate for probe wear or varying material heights without reprogramming the machine.
Small Carton Flap Folding
Folds light cardboard flaps on a packaging line, where the 2 kg vertical lift capacity and fine-tuned extend position ensure gentle, accurate contact without crushing the box.
Is the Airtac MIJ Adjustable Cylinder MIJ10X50-10S the Right Cylinder?
When sizing this 10 mm bore, consider that a smaller Ø8 bore yields 25.1 N of push force at 0.5 MPa, while stepping up to a Ø12 bore provides 56.5 N. Choose this model when your mechanism needs on-the-fly tolerance take-up; the 10 mm adjustment window is ideal for dialing in a precise feed distance. The stop screw sets the forward end position but is not a mid-stroke lock. If the load must be held during air loss, install an external pilot check valve or rod lock. Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot blocks are not available). The -S magnet enables position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X50-10S FAQ
At 0.5 MPa, this 10 mm bore cylinder provides 39.3 N of push force and 33 N of pull force. At 0.7 MPa, push increases to 55 N and pull to 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. It features an M5x0.8 air port.
An external stop screw shortens the extend stroke by up to 10 mm on-site, allowing you to set a precise forward end position (retract remains full stroke). The -S suffix indicates a built-in piston magnet, enabling the use of CMSG, DMSG, or EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X50-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.