Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB
Dial in a precise forward end position on-site with the AirTAC MIJ10X50-20SLB, a double-acting round-body mini cylinder featuring a 20 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 50 mm nominal length down to 30 mm without changing the unit, while the retract stroke remains full. Built with a stainless-steel barrel and piston rod, it handles mild corrosion and washdown environments while conforming to the ISO 6432 mounting interface for standard mini brackets.
At 0.5 MPa this Ø10 bore generates 39.3 N of push force and 33 N of pull force, yielding a safe working load of roughly 24 N or a vertical lift capacity of about 2 kg with a 2:1 margin. The M5x0.8 air port and M4x0.7 male rod thread keep the envelope compact, and fixed TPU bumper pads decelerate the stroke ends. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG or EMSG position switches.
Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB Is Used
Light-Actuation Stops
Drives small 24 N workloads like flap opening or pin ejecting, using the 20 mm extend adjuster to hit the exact forward stop without reprogramming valves.
Package Diverter Setup
Pushes lightweight 2 kg cartons on a belt line, fine-tuning the extend position on-site to accommodate varying package widths.
Staged Component Feeding
Advances small parts out of a nest, relying on the stainless build for mild washdown resistance and the adjustable forward end to manage tolerance take-up.
Is the Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB the Right Cylinder?
When sizing this unit, step down to an Ø8 MIJ if your load is under 25 N push at 0.5 MPa, or step up to a Ø16 MIJ if you need over 100 N. The 20 mm external adjuster is ideal for taking up mechanical tolerances during setup or covering multiple stop positions with a single part number. Remember that the stop screw only trims the extend end; it is not a mid-stroke lock, and the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. This configuration ships with an LB foot mount, and the SDB pivot block is not available on this adjustable-stroke variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB FAQ
This cylinder uses an M5x0.8 air port and delivers 39.3 N push / 33 N pull at 0.5 MPa, and 55 N push / 46.1 N pull at 0.7 MPa. The theoretical maximum force is 8 kgf at 1.0 MPa.
The external stop screw shortens the extend stroke by up to 20 mm (usable forward range 30-50 mm), but does not affect the full retract stroke. The -S suffix means it has a built-in piston magnet for CMSG, DMSG or EMSG sensors, and the stainless steel construction resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X50-20SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.