Airtac MIJ Adjustable Cylinder MIJ10X50-30S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X50-30S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X50-30S
Dial in a precise forward end position on-site with the AirTAC MIJ10X50-30S, a round-body stainless steel mini cylinder featuring a 30 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 50 mm nominal length down to 20 mm without swapping parts, while retract remains full. Built with a riveted stainless barrel and Ø4 mm rod, it handles mild washdown environments and delivers 39.3 N of push force at 0.5 MPa.
This double-acting ISO 6432 unit ports via M5×0.8 threads and includes a piston magnet (-S) for position sensing. It yields a safe working load of roughly 24 N, translating to a vertical lift capacity of about 2 kg with a 2:1 safety margin. Fixed TPU bumper pads decelerate the stroke ends, operating reliably at speeds of 30-800 mm/s across a -20 to +70 °C range.
Airtac MIJ Adjustable Cylinder MIJ10X50-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X50-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X50-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X50-30S Is Used
Light Parts Ejector
Ejects small plastic or stamped parts from a fixture. The 30 mm adjuster fine-tunes the kick distance to prevent parts from flying, using the 39.3 N push force effectively.
Staged Divert Gate
Acts as a retractable guide on a mini conveyor. Operators can dial the extend stroke in 1 mm increments to match varying product widths without changing hardware.
Sensor Positioning Arm
Moves a testing probe into place against delicate electronics. The 2 kg safe vertical lift capacity is sufficient for the sensor mass, and the stop screw ensures repeatable soft contact.
Is the Airtac MIJ Adjustable Cylinder MIJ10X50-30S the Right Cylinder?
When sizing this 10 mm bore, step down to an MIJ8 if your load is very light, but note the push force drops to 25.1 N at 0.5 MPa. If you need more authority, the next size up is the MIJ12, which jumps to 56.5 N. The 30 mm on-site adjustability is ideal for taking up mechanical tolerances during setup or covering multiple stop positions from a single SKU. Remember that the stop screw only trims the extend end; it does not function as a mid-stroke lock, so add an external pilot check valve if you need to hold a load on air loss.
Mount this cylinder using standard ISO 6432 brackets like LB foot, FA flange, or TC trunnion (the SDB pivot block is not offered on this adjustable variant). Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for precise end-of-stroke detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X50-30S FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5×0.8.
An external stop screw shortens the extend stroke by up to 30 mm on-site, giving a usable forward range of 20-50 mm; the retract stroke remains fixed at full length. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X50-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.