Airtac MIJ Adjustable Cylinder MIJ10X50-50S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X50-50S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X50-50S
Dial in a precise forward end position on-site with the AirTAC MIJ10X50-50S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 50 mm, allowing one part number to cover several forward stops without swapping hardware. The retract stroke remains full length, and the screw acts only as an end-position setter, not a mid-stroke lock.
Driven by a 10 mm bore and an M5x0.8 port, this unit delivers 39.3 N of push force at 0.5 MPa, translating to a safe working load of roughly 24 N or a 2 kg vertical lift with a 2:1 margin. The riveted stainless barrel and rod resist mild corrosion and washdown environments. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ10X50-50S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X50-50S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X50-50S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X50-50S Is Used
Light-Actuation Changeover
Use the 50 mm extend adjustment to set multiple forward stops for varying part lengths on a 24 N load, accommodating changeovers without mounting a new cylinder.
Tolerance Take-Up Feeds
Fine-tune the forward end position on the fly to absorb mechanical tolerances in a small assembly station, using the 39.3 N push to index light components.
Washdown Test Rigs
Leverage the stainless steel barrel and rod in mildly corrosive lab environments, adjusting the extend stroke to trigger sensors or contacts at exact distances.
Is the Airtac MIJ Adjustable Cylinder MIJ10X50-50S the Right Cylinder?
When sizing this 10 mm bore variant against adjacent models, the smaller 8 mm bore yields 25.1 N of push at 0.5 MPa, while the larger 12 mm bore provides 56.5 N. Choose this cylinder when your application requires that 39.3 N thrust and the flexibility to trim the extend stroke on the fly for setup or tolerance take-up. It conforms to the ISO 6432 mounting interface, fitting standard mini brackets and clevises, though the SDB pivot block is not offered on this adjustable type.
Keep in mind that a standard pneumatic cylinder does not hold a load on air loss; the piston will drift. The fixed TPU bumper pads only decelerate the stroke end rather than locking the rod. For suspended loads, pair this unit with an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X50-50S FAQ
This 10 mm bore cylinder features an M5x0.8 port and delivers 39.3 N push / 33 N pull at 0.5 MPa, and 55 N push / 46.1 N pull at 0.7 MPa. The theoretical maximum force is 8 kgf at 1.0 MPa.
The external stop screw shortens the extend stroke by up to 50 mm on-site, setting the exact forward end position while retract remains full. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X50-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.