Airtac MIJ Adjustable Cylinder MIJ10X60-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X60-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X60-10S
Dial in a precise forward end position on-site with the AirTAC MIJ10X60-10S, a round-body stainless steel mini cylinder featuring a 10 mm extend-stroke adjustment window. The external stop screw lets you trim the forward stroke down from the 60 mm nominal length without swapping hardware, while the double-acting operation delivers 39.3 N of push force at 0.5 MPa.
Built with a riveted stainless barrel and rod, this unit resists mild corrosion and handles washdown environments. It conforms to ISO 6432 mounting dimensions and includes a built-in piston magnet (-S) for CMSG, DMSG, or EMSG sensors. With a safe working load of roughly 24 N, it can vertically lift about 2 kg with a 2:1 safety margin.
Airtac MIJ Adjustable Cylinder MIJ10X60-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X60-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X60-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X60-10S Is Used
Light-Duty Parts Pusher
Feeds small components on an assembly line, using the 10 mm extend adjuster to dial in the exact contact point without reprogramming the machine.
Package Diverter Gate
Sorts lightweight cartons by extending a flap to a set distance, easily trimmed on-site to accommodate varying box widths.
Sensor Positioning Arm
Moves a testing probe into place with a safe working load near 24 N, relying on the magnet for end-of-stroke confirmation.
Is the Airtac MIJ Adjustable Cylinder MIJ10X60-10S the Right Cylinder?
For lighter tasks, the Ø8 bore provides 25.1 N push at 0.5 MPa, whereas stepping up to the Ø16 bore yields 100.5 N if you need significantly more force. The 10 mm adjuster is ideal for taking up mechanical tolerances during setup or covering multiple stop positions with a single part number. Remember that the stop screw only trims the extend end; it is not a mid-stroke lock, so add an external pilot check valve if you must hold a load on air loss. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable), and use the -S magnet to fit your chosen position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X60-10S FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it yields 55 N push and 46.1 N pull. The theoretical maximum is 8 kgf at 1.0 MPa. The air port is M5x0.8.
The external stop screw shortens the extend stroke by up to 10 mm on-site, setting the forward end position without affecting the full retract. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors. Fixed TPU bumper pads decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.