Airtac MIJ Adjustable Cylinder MIJ10X60-20
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X60-20 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X60-20
Dial in a precise forward end position on-site with the AirTAC MIJ10X60-20, a round-body stainless-steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 20 mm, yielding a usable forward travel of 40 to 60 mm without swapping parts. The retract stroke remains full length. It conforms to the ISO 6432 mounting interface for standard mini brackets and uses an M5x0.8 air port with an M4x0.7 male rod thread.
The stainless barrel and rod supply mild corrosion resistance for washdown environments. Delivering 39.3 N of push force at 0.5 MPa, it handles a safe working load of roughly 24 N or vertically lifts about 2 kg with a 2:1 margin. This SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. Fixed TPU bumper pads decelerate the stroke ends, operating at speeds from 30 to 800 mm/s.
Airtac MIJ Adjustable Cylinder MIJ10X60-20 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X60-20 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X60-20
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X60-20 Is Used
Light Part Ejection
Uses the 20 mm extend adjustment to tune the exact ejection point of small plastic clips, preventing overshoot while pushing with 39.3 N of force.
Staged Diverter Stops
Sets precise retract and extend limits to act as a configurable gate for small product packages on a washdown line, relying on the stainless build.
Probe Positioning
Dials in the forward stop for delicate testing probes, ensuring the rod touches the target without crushing, safely moving about a 2 kg load.
Is the Airtac MIJ Adjustable Cylinder MIJ10X60-20 the Right Cylinder?
When sizing this 10 mm bore, step down to an MIJ8 for lighter duties (25.1 N push @0.5 MPa) or step up to an MIJ12 (56.5 N push @0.5 MPa) if you need more thrust. The 20 mm external adjuster is ideal for taking up mechanical tolerances during setup or staging feeds across changeover jobs. You can mount it via LB foot, FA flange, or TC trunnion, but the SDB pivot-block is not available on this adjustable variant. Remember that the stop screw sets the end position but does not function as a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X60-20 FAQ
This double-acting cylinder uses an M5x0.8 port and provides 39.3 N push / 33 N pull at 0.5 MPa, and 55 N push / 46.1 N pull at 0.7 MPa. The theoretical maximum force is 8 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 20 mm on-site, setting the forward end position without affecting the full retract stroke. This specific SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors; you would need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X60-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.