Airtac MIJ Adjustable Cylinder MIJ10X60-20S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X60-20S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X60-20S
Trim the forward travel by up to 20 mm on site with the external stop screw, letting you fine-tune the extend endpoint from 40 to 60 mm without changing the cylinder. This AirTAC MIJ10X60-20S is a double-acting, round-body stainless-steel mini cylinder with a 10 mm bore, a 60 mm nominal stroke, and a built-in piston magnet for position sensing.
The stainless barrel and rod resist mild corrosion and washdown environments. It delivers 39.3 N of push force at 0.5 MPa, translating to a safe working load of about 24 N or a 2 kg vertical lift with a 2:1 margin. The M5x0.8 port and M4x0.7 male rod thread fit standard mini-cylinder setups.
Airtac MIJ Adjustable Cylinder MIJ10X60-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X60-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X60-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X60-20S Is Used
Gauge Positioning Stops
Dial in the exact 40 to 60 mm extend point to push a measuring gauge onto parts of varying heights without swapping actuators.
Staged Part Diverting
Use the adjustable stop to change the extend length on the fly for sorting different product sizes on a conveyor line.
Light Assembly Pushing
Apply a precise 24 N working load to seat small electronic components or light subassemblies during automated changeover jobs.
Is the Airtac MIJ Adjustable Cylinder MIJ10X60-20S the Right Cylinder?
This 10 mm bore generates 39.3 N push and 33 N pull at 0.5 MPa. If you need less force, step down to the 8 mm bore (25.1 N push); if your load requires more, move up to the 12 mm bore (56.5 N push). The 20 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds, letting one part number cover several stop positions.
Because the stop screw only trims the extend end, retract remains full. The cylinder does not hold position on air loss and will drift, so add an external rod lock or pilot check valve for suspended loads. Mount using LB foot, FA flange, or TC trunnion brackets (SDB is unavailable), and use CMSG, DMSG, or EMSG sensors with the included -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X60-20S FAQ
It has an M5x0.8 port. At 0.5 MPa it pushes 39.3 N and pulls 33 N. At 0.7 MPa it pushes 55 N and pulls 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm on site, but retract remains full. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors. It uses fixed TPU bumper pads, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X60-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.