Airtac MIJ Adjustable Cylinder MIJ10X60-40
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X60-40 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X60-40
Dial in your forward end position on-site with the AirTAC MIJ10X60-40, a round-body stainless steel mini cylinder that lets an external stop screw shorten the extend stroke by up to 40 mm. Because it uses the ISO 6432 mounting interface, this Ø10 mm bore unit drops directly into standard mini brackets and clevises. The riveted stainless barrel and piston rod supply reliable mild corrosion resistance for washdown or humid settings.
This double-acting actuator delivers 39.3 N of push force at 0.5 MPa, translating to a safe working load of roughly 24 N or a vertical lift of about 2 kg with a 2:1 margin. Air connects via an M5×0.8 port, and fixed TPU bumper pads decelerate the piston at the stroke ends. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to the -S variant.
Airtac MIJ Adjustable Cylinder MIJ10X60-40 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X60-40 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X60-40
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X60-40 Is Used
Light-Part Diverter
Trim the extend stroke by up to 40 mm to deflect small items on a conveyor without repositioning the cylinder mount, using the 39.3 N push force for reliable light contact.
Tolerance Take-Up Stop
Absorb mechanical variations in small assemblies by fine-tuning the forward stop position on-site, ensuring the 2 kg vertical lift capacity is applied precisely where needed.
Staged Feed Pusher
Set exact multiple forward endpoints for a changeover job by adjusting the external screw, letting one actuator handle different part sizes within its 60 mm stroke.
Is the Airtac MIJ Adjustable Cylinder MIJ10X60-40 the Right Cylinder?
When sizing this 10 mm bore, stepping down is not an option as it is the smallest available, but stepping up to the Ø16 bore raises your 0.5 MPa push force to 100.5 N if 39.3 N is insufficient. The 40 mm adjustment window is highly useful for taking up mechanical tolerances or covering multiple stop positions in a single assembly without changing the cylinder body. Keep in mind the stop screw only trims the extend end; it does not function as a mid-stroke lock, and the piston will drift if air pressure is lost. For load holding, integrate an external pilot check valve or rod lock. Mount using LB foot, FA flange or TC trunnion brackets, as the SDB pivot block is not offered for this adjustable series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X60-40 FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull; at 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5×0.8.
An external stop screw shortens the extend stroke by up to 40 mm on-site, while the retract stroke remains full. This SKU does not have a magnet, so it cannot accept CMSG, DMSG or EMSG sensors; you must select the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X60-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.