Airtac MIJ Adjustable Cylinder MIJ10X60-40S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X60-40S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X60-40S
Dial in a precise forward end position on the fly with the AirTAC MIJ10X60-40S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 40 mm on-site, providing a usable forward range of 20-60 mm without swapping hardware. The retract stroke remains full length. Because the barrel and piston rod are stainless and riveted, the unit resists mild corrosion and washdown environments.
Driven by an M5x0.8 air port, this Ø10 mm bore generates 39.3 N of push force at 0.5 MPa, translating to a safe working load of roughly 24 N or a 2 kg vertical lift with a 2:1 margin. The included -S piston magnet supports CMSG, DMSG and EMSG switches for position sensing. It conforms to the ISO 6432 mounting interface for standard mini brackets and uses fixed TPU bumper pads to decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ10X60-40S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X60-40S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X60-40S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X60-40S Is Used
Adjustable Stop Gauging
Use the 40 mm extend adjustment to fine-tune a mechanical stop for lightweight gauging or probing tasks, ensuring the 39.3 N push force contacts the part without over-traveling.
Staged Part Routing
Trim the forward stroke on the fly to divert small packages on a conveyor, using the external screw to change the end position for different product sizes without changing cylinders.
Light Assembly Tolerance Take-up
Absorb dimensional variations in small component assembly by dialing in the exact extend position, letting the 2 kg safe vertical lift capacity press parts gently into place.
Is the Airtac MIJ Adjustable Cylinder MIJ10X60-40S the Right Cylinder?
When sizing this actuator, verify your force needs against the 39.3 N push and 33 N pull figures at 0.5 MPa. If your application requires less thrust, the smaller Ø8 bore provides 25.1 N push, whereas the larger Ø16 bore steps up to 100.5 N for heavier loads. The 40 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds during setup, letting one part number cover several stop positions.
Remember that the stop screw only trims the extend end point; it is not a mid-stroke lock. The cylinder will drift and cannot hold a load on air loss, so add an external rod lock or pilot check valve if you need true position holding. For mounting, you can use LB foot, FA flange or TC trunnion brackets, but the SDB pivot block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X60-40S FAQ
This double-acting cylinder uses an M5x0.8 air port and generates 39.3 N push / 33 N pull at 0.5 MPa, and 55 N push / 46.1 N pull at 0.7 MPa. The theoretical maximum force is 8 kgf at 1.0 MPa.
The external stop screw shortens the extend stroke by up to 40 mm, giving a usable forward range of 20-60 mm, while retract remains full. The -S suffix means it has a built-in piston magnet for CMSG, DMSG or EMSG sensors. Fixed TPU bumpers decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X60-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.