Airtac MIJ Adjustable Cylinder MIJ10X75-20S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ10X75-20S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø10mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ10X75-20S
Dial in a precise forward end position on-site with the AirTAC MIJ10X75-20S, a round-body stainless mini cylinder built for double-acting operation. An external stop screw trims the extend stroke by up to 20 mm, giving you a usable forward range of 55-75 mm without swapping parts, while the retract stroke remains full. The stainless-steel barrel and piston rod supply mild corrosion and washdown resistance for demanding environments.
Delivering 39.3 N of push force at 0.5 MPa, this ISO 6432 mounting-interface actuator handles light positioning tasks efficiently, yielding a safe working load of about 24 N or a 2 kg vertical lift with a 2:1 margin. The integrated -S piston magnet supports CMSG, DMSG, and EMSG sensors for position confirmation. It connects via an M5x0.8 port and relies on fixed TPU bumper pads to decelerate the stroke end.
Airtac MIJ Adjustable Cylinder MIJ10X75-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ10X75-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ10X75-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ10X75-20S Is Used
Light-Duty Part Push-Off
Tuned to deliver a 24 N working push, the adjustable stop lets you set the exact contact distance to nudge small plastic components off a conveyor without overshooting.
Staged Carton Feeds
Trimming the extend stroke by up to 20 mm allows precise spacing when staging lightweight cardboard cartons, accommodating varying package sizes on the fly.
Sensor Setup & Changeover
Leveraging the built-in -S magnet for DMSG switches, operators can fine-tune the forward end position during product line changeovers to dial in new stop lengths rapidly.
Is the Airtac MIJ Adjustable Cylinder MIJ10X75-20S the Right Cylinder?
For lighter duty, the MIJ8 bore provides 25.1 N push at 0.5 MPa, whereas stepping up to the MIJ16 offers 100.5 N if your payload exceeds the 24 N safe working load of this Ø10 unit. The 20 mm external adjuster is ideal for absorbing mechanical tolerances or matching multiple stop points during changeovers using a single part number. Remember that the stop screw sets the end position but acts as neither a mid-stroke lock nor a brake; the piston will drift on air loss, so fit an external pilot check valve if you need to hold a load vertically. Mount this cylinder using LB foot, FA flange, or TC trunnion brackets, noting the SDB pivot block is not offered for this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ10X75-20S FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull; at 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa, and the air port is M5x0.8.
An external screw shortens the extend stroke by up to 20 mm on-site, letting you set the forward end position without changing the unit, while the retract stroke remains full. The -S suffix denotes a built-in piston magnet enabling CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ10X75-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.