Airtac MIJ Adjustable Cylinder MIJ20X10-10
The AirTAC Airtac MIJ Adjustable Cylinder MIJ20X10-10 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ20X10-10
Dial in your forward end position on-site with the AirTAC MIJ20X10-10, a round-body stainless steel mini cylinder that lets an external stop screw shorten the extend stroke by up to 10 mm. Because the retract travel remains full, you get precise forward tolerance take-up without stocking multiple cylinders. The Ø20 mm bore delivers 157 N of push force at 0.5 MPa, yielding a safe working load of about 94 N or a 2:1 vertical lift margin near 8 kg.
Built with a riveted stainless barrel and rod for mild washdown resistance, this double-acting unit conforms to the ISO 6432 mounting interface for standard mini brackets. It uses a 1/8" port and an M8x1.25 male rod thread. Fixed TPU bumper pads decelerate the stroke end, but note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ20X10-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ20X10-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ20X10-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ20X10-10 Is Used
Staged Feed Diverter
Trim the 10 mm extend stroke to nudge packages of varying widths onto a secondary belt without repositioning the entire cylinder mount.
Light Press Tolerance Take-up
Use the 157 N push force to seat small bearings, adjusting the external stop screw to compensate for material thickness variations on the fly.
Carton Flap Tucking
Dial in the exact forward end position to tuck carton flaps of different heights, relying on the fixed TPU bumpers to soften the stroke end.
Is the Airtac MIJ Adjustable Cylinder MIJ20X10-10 the Right Cylinder?
When sizing this 20 mm bore, step down to an MIJ16 (100.5 N push @0.5 MPa) for lighter loads, or up to an MIJ25 (245.3 N push @0.5 MPa) if you need more thrust. The 10 mm adjustable extend window is ideal for changeover jobs where you need one part number to cover several slight forward stops. Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot block is not available on this adjustable variant. Remember the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ20X10-10 FAQ
This double-acting cylinder uses a 1/8" port and generates 157 N push / 131.9 N pull at 0.5 MPa, and 219.8 N push / 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, while retract remains full. This SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors; you would need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ20X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.