Airtac MIJ Adjustable Cylinder MIJ20X150-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ20X150-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ20X150-10S
Dialing in a precise forward end position on-site is effortless with this stainless-steel round-body mini cylinder, thanks to an external stop screw that trims the extend stroke by up to 10 mm. The double-acting MIJ20X150-10S delivers 157 N of push force at 0.5 MPa, making it a robust choice for mid-range actuation.
Built to ISO 6432 mounting interface standards, it drops directly into standard mini brackets and features a 1/8" port with an M8x1.25 male rod thread. The integrated -S piston magnet supports CMSG, DMSG, and EMSG switches for position sensing, while the stainless barrel and rod provide reliable mild corrosion resistance for washdown environments.
Airtac MIJ Adjustable Cylinder MIJ20X150-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ20X150-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ20X150-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ20X150-10S Is Used
Package Diverting Gate
Fine-tune the 10 mm extend stop to deflect cartons of varying widths on a conveyor without swapping hardware, using the 157 N push force to positively guide items.
Component Pressing Fixture
Adjust the forward end position on-site to press lightweight bearings or pins to exact depths, leveraging the 219.8 N push force available at 0.7 MPa.
Staged Parts Ejection
Set a precise retract and extend cycle to push parts from a machining center into a chute, dialing in the 10 mm stroke trim to accommodate different part geometries.
Is the Airtac MIJ Adjustable Cylinder MIJ20X150-10S the Right Cylinder?
When sizing this 20 mm bore actuator, stepping down to a 16 mm MIJ yields 100.5 N of push force at 0.5 MPa, whereas moving up to a 25 mm bore provides 245.3 N. This model's 10 mm adjustment window is ideal for taking up mechanical tolerances during setup or covering multiple stop points with a single part number. The stop screw sets the end position but does not function as a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. Mounting options include LB, FA, and TC styles, but SDB pivot blocks are not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ20X150-10S FAQ
This 20 mm bore cylinder uses a 1/8" air port. At 0.5 MPa it provides 157 N of push force and 131.9 N of pull force. At 0.7 MPa, push increases to 219.8 N and pull to 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, letting you set the exact forward position without changing the cylinder; retract remains full stroke. The -S suffix indicates a built-in piston magnet for use with CMSG, DMSG, or EMSG sensors. Fixed TPU bumper pads decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ20X150-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.