Airtac MIJ Adjustable Cylinder MIJ20X60-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ20X60-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ20X60-10S
Trimming the forward end position by up to 10 mm on-site, this stainless-steel round-body mini cylinder lets you fine-tune the extend stroke from 60 mm down to 50 mm without changing parts. The external stop screw sets the forward stop, while the retract stroke remains full. Because the -S suffix denotes a built-in piston magnet, the unit is ready to accept CMSG, DMSG, or EMSG reed and electronic sensors for end-of-stroke detection.
Operating at 0.15-1.0 MPa on a 1/8" port, the Ø20 bore delivers a push force of 157 N and a pull force of 131.9 N at 0.5 MPa. This yields a safe working load of roughly 94 N, capable of vertically lifting about 8 kg with a 2:1 safety margin. The riveted stainless barrel and M8x1.25 male rod thread provide mild washdown resistance, and the design conforms to the ISO 6432 mounting interface for standard mini brackets.
Airtac MIJ Adjustable Cylinder MIJ20X60-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ20X60-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ20X60-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ20X60-10S Is Used
Transfer Gate Deflection
Dial in the exact 50-60 mm extend stroke to deflect parts onto a secondary line, absorbing minor frame tolerances without re-specifying the cylinder.
Carton Flap Tucking
With 157 N of push force at 0.5 MPa, the rod securely tucks flaps, while the 10 mm on-site adjustment compensates for varying box thicknesses.
Staged Component Feeding
Precisely push lightweight components to a pick point, using the adjustable forward stop to alter the feed distance for different product changeovers.
Is the Airtac MIJ Adjustable Cylinder MIJ20X60-10S the Right Cylinder?
When sizing this actuator, consider the adjacent bores: a smaller Ø16 MIJ provides 100.5 N push at 0.5 MPa, while a larger Ø25 MIJ offers 245.3 N. The 10 mm adjustment window is highly useful for taking up mechanical tolerances or staging feeds during setup. Mounting options include LB foot, FA flange, and TC trunnion, but the SDB pivot block is not available on this adjustable variant. Fixed TPU bumper pads decelerate the stroke ends across the 30-800 mm/s speed range.
Note that the stop screw only sets the end position; it is not a mid-stroke lock. The piston will drift if air pressure is lost, so you must use an external rod lock or pilot-operated check valve to hold a suspended load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ20X60-10S FAQ
This double-acting cylinder uses a 1/8" port and generates 157 N push / 131.9 N pull at 0.5 MPa, and 219.8 N push / 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, but the retract stroke remains full. The -S suffix means it includes a piston magnet for CMSG, DMSG, or EMSG sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ20X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.