Airtac MIJ Adjustable Cylinder MIJ20X60-10SG
The AirTAC Airtac MIJ Adjustable Cylinder MIJ20X60-10SG is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ20X60-10SG
Trimming the forward end position by up to 10 mm on site, the AirTAC MIJ20X60-10SG lets you fine-tune a 60 mm extend stroke without swapping hardware. This double-acting, round-body stainless steel mini cylinder delivers 157 N of push force at 0.5 MPa, yielding a safe working load of roughly 94 N or an 8 kg vertical lift with a 2:1 margin.
Built with a stainless barrel and rod to resist mild washdown corrosion, it uses the ISO 6432 mounting interface for standard mini brackets. The 1/8" port and M8x1.25 male rod thread handle the air and load transfer, while fixed TPU bumper pads decelerate the stroke ends. Because this SKU includes the -S magnet, it is ready for CMSG, DMSG or EMSG position switches.
Airtac MIJ Adjustable Cylinder MIJ20X60-10SG Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ20X60-10SG |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ20X60-10SG
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ20X60-10SG Is Used
Adjustable Stop Pushing
Dial in the exact 50-60 mm extend position to push parts into a fixture, absorbing setup tolerances with 157 N of force at 0.5 MPa.
Staged Feed Diverter
Use the 10 mm on-site stroke trim to alter the stroke length for product changeovers on a conveyor line without changing the cylinder.
Light Carton Sealing
Extend 60 mm to press light carton flaps, utilizing the 8 kg safe vertical lift capacity to handle packaging materials reliably.
Is the Airtac MIJ Adjustable Cylinder MIJ20X60-10SG the Right Cylinder?
When sizing this 20 mm bore, dropping down to an MIJ16 cuts the 0.5 MPa push force to 100.5 N, whereas stepping up to an MIJ25 raises it to 245.3 N. The external stop screw is ideal for taking up mechanical tolerances during setup or covering several closely spaced stops with one assembly.
Remember that the stop screw only sets the end position; it is not a mid-stroke lock, and the piston will drift if air pressure is lost. For load holding, install an external rod lock or pilot check valve. Mount using LB, FA or TC hardware (SDB is unavailable here), and rely on the built-in magnet for electronic sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ20X60-10SG FAQ
At 0.5 MPa it provides 157 N push and 131.9 N pull; at 0.7 MPa it provides 219.8 N push and 184.7 N pull. The theoretical maximum force is 32 kgf at 1.0 MPa. The air port is 1/8".
An external stop screw shortens the extend stroke by up to 10 mm on site, while retract remains full. The -S suffix means a piston magnet is built-in for CMSG/DMSG/EMSG sensors. The screw is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ20X60-10SG
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.