Airtac MIJ Adjustable Cylinder MIJ20X65-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ20X65-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø20mm bore and 65mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke65 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ20X65-10S
Trimming the forward end position by up to 10 mm on site, the AirTAC MIJ20X65-10S lets you fine-tune a 65 mm extend stroke without swapping hardware. This double-acting, round-body stainless steel mini cylinder delivers 157 N of push force at 0.5 MPa, yielding a safe working load of roughly 94 N or a 2:1 vertical lift capacity of about 8 kg.
The Ø20 mm bore uses a 1/8" port and an M8x1.25 male rod thread, conforming to the ISO 6432 mounting interface for straightforward bracket integration. Because this SKU includes the -S magnet, it is fully compatible with CMSG, DMSG, and EMSG sensors for position detection. Fixed TPU bumper pads absorb end-of-stroke impacts, while the stainless barrel and rod withstand mild washdown environments.
Airtac MIJ Adjustable Cylinder MIJ20X65-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ20X65-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 65 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ20X65-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ20X65-10S Is Used
Package Diverter Stop
Dial in the exact 55 to 65 mm extend position to deflect cartons of varying widths on a packaging line without changing the cylinder.
Tooling Clearance Adjustment
Take up mechanical tolerances on a light-duty press, using the 10 mm adjuster to set the precise forward position for an 8 kg workpiece.
Staged Parts Feeding
Index components forward to a defined stop, relying on the 157 N push force and the external screw to tune the feed length on site.
Is the Airtac MIJ Adjustable Cylinder MIJ20X65-10S the Right Cylinder?
When sizing this actuator, the adjacent bores provide clear scaling paths: step down to the Ø16 bore for 100.5 N push at 0.5 MPa, or move up to the Ø25 bore for 245.3 N if your payload exceeds the 94 N safe working load. The 10 mm external stop screw is ideal for taking up mechanical tolerances during setup or covering multiple intermediate stops with a single part number.
Keep in mind the stop screw only trims the extend end position; it is not a mid-stroke lock. If air pressure drops, the piston will drift, so fit an external rod lock or pilot check valve for suspended loads. For mounting, utilize LB foot, FA flange, or TC trunnion brackets (the SDB pivot block is unavailable on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ20X65-10S FAQ
This Ø20 mm bore cylinder features a 1/8" port and generates 157 N push / 131.9 N pull at 0.5 MPa, and 219.8 N push / 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on site (retract remains full), letting you fine-tune the forward end position. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ20X65-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.