Airtac MIJ Adjustable Cylinder MIJ20X75-10
The AirTAC Airtac MIJ Adjustable Cylinder MIJ20X75-10 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø20mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ20X75-10
Trimming the forward end by up to 10 mm on site, the AirTAC MIJ20X75-10 lets you fine-tune the extend position from 65 to 75 mm without swapping parts. This double-acting round-body mini cylinder delivers 157 N of push force at 0.5 MPa, yielding a safe working load of roughly 94 N or about an 8 kg vertical lift with a 2:1 margin.
Built with a stainless-steel barrel and rod, it handles mild washdown environments and conforms to the ISO 6432 mounting interface for standard mini brackets. It uses a 1/8" port and an M8x1.25 male rod thread. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors without switching to the -S variant.
Airtac MIJ Adjustable Cylinder MIJ20X75-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ20X75-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ20X75-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ20X75-10 Is Used
Gauge Positioning
Dial in the exact 65 to 75 mm forward reach to seat a gauging head against varied part heights without machining custom spacers.
Staged Feed Stops
Use the 157 N push force to index light cartons on a belt, fine-tuning the 10 mm extend window to compensate for belt stretch or wear.
Tool Changeover
Adjust the forward stop on the fly during product changeovers, quickly resetting the end position for different assembly tooling offsets.
Is the Airtac MIJ Adjustable Cylinder MIJ20X75-10 the Right Cylinder?
When sizing this 20 mm bore, stepping down to an MIJ16 lowers the 0.5 MPa push force to 100.5 N, while moving up to an MIJ25 raises it to 245.3 N. The 10 mm external stop screw is ideal for absorbing setup tolerances or staging feeds, letting one part number cover several end positions.
Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot block is not offered for this adjustable type. Remember that the stop screw only sets the end position; it is not a mid-stroke lock, and the cylinder will drift on air loss. Use an external pilot check valve if you need to hold a load vertically.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ20X75-10 FAQ
At 0.5 MPa it provides 157 N push and 131.9 N pull. At 0.7 MPa it provides 219.8 N push and 184.7 N pull. The theoretical maximum is 32 kgf at 1.0 MPa, and the air port is 1/8".
An external stop screw shortens the extend stroke by up to 10 mm, allowing you to set the forward end position between 65 and 75 mm. The retract stroke remains full. This SKU has no magnet for sensors, and fixed TPU bumpers decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ20X75-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.