Airtac MIJ Adjustable Cylinder MIJ20X75-50
The AirTAC Airtac MIJ Adjustable Cylinder MIJ20X75-50 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø20mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ20X75-50
Dial in your forward end position on the fly with the AirTAC MIJ20X75-50, a double-acting round-body mini cylinder featuring a 50 mm external adjustment window. By turning the stop screw, you shorten the extend stroke from its 75 mm nominal length down to 25 mm, absorbing setup tolerances without swapping hardware. Retract travel remains full length. Built with a stainless-steel barrel and rod, it handles mild washdown environments better than standard carbon units.
This Ø20 bore generates 157 N of push force at 0.5 MPa, translating to a safe working load of roughly 94 N or a 2:1 vertical lift of about 8 kg. It uses a 1/8" port and an M8x1.25 male rod thread. Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG sensors. The ISO 6432 mounting interface ensures direct compatibility with standard mini brackets, and fixed TPU bumpers decelerate the piston at the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ20X75-50 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ20X75-50 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ20X75-50
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ20X75-50 Is Used
Variable Length Diverter
Trim the extend stroke by up to 50 mm to deflect different carton sizes on a packaging line without changing the cylinder mounting.
Multi-Stop Clamping Arm
Use the 157 N push force to secure parts, dialing the forward stop back to 25 mm for shorter blanks and out to 75 mm for longer stock.
Adjustable Push-off Ejector
Eject bins of varying widths from a cell, relying on the stainless build to endure occasional washdown without corroding.
Is the Airtac MIJ Adjustable Cylinder MIJ20X75-50 the Right Cylinder?
If your application needs less push, the smaller MIJ16 bore provides 100.5 N at 0.5 MPa; if you need more, stepping up to the MIJ25 yields 245.3 N. The 50 mm adjustment window here is ideal for machines running multiple product sizes, letting one cylinder cover several extend stops. Remember that the stop screw only trims the extend end position—it is not a mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve if you must hold a suspended load. You can use LB foot, FA flange, or TC trunnion mounts, but SDB pivot blocks are not available for this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ20X75-50 FAQ
This cylinder uses a 1/8" port. At 0.5 MPa it pushes with 157 N and pulls with 131.9 N. At 0.7 MPa the push is 219.8 N and the pull is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50 mm, giving a usable forward range of 25 to 75 mm. Retract remains full stroke. The screw only sets the end position and does not lock the piston; the cylinder will drift on air loss. Also, this non-S SKU has no magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ20X75-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.