Airtac MIJ Adjustable Cylinder MIJ32X10-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X10-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X10-10S
Dialing in a precise forward end position on-site is effortless with this stainless-steel round-body mini cylinder. As a double-acting unit, the MIJ32X10-10S uses an external stop screw to shorten the extend stroke by up to 10 mm, letting you take up tolerances or stage feeds without changing the actuator. The retract stroke remains full length. Built with a 32 mm bore and a 1/8" port, it delivers 402.2 N of push force at 0.5 MPa.
The riveted stainless barrel and piston rod resist mild corrosion and washdown environments. Because this is a non-ISO-6432 size, it functions as a robust large mini cylinder rather than a standard interchange unit. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG switches. For sizing, a safe working load is roughly 241 N, and it can vertically lift about 20.5 kg with a 2:1 safety margin. Fixed TPU bumper pads decelerate the stroke end.
Airtac MIJ Adjustable Cylinder MIJ32X10-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X10-10S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X10-10S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X10-10S Is Used
Press Fit Tolerance Take-Up
Use the 10 mm extend adjustment to compensate for material stack tolerances during light-duty press fits, applying up to 402.2 N of push force without bottoming out hard against the fixture.
Staged Part Escapement
Dial the forward stop in or out to release precisely one component from a queue, using the 563 N push force at 0.7 MPa to positively index heavier pallets on a washdown line.
Variable Depth Carton Stops
Fine-tune the extend end position on the fly for different carton depths, leveraging the stainless construction to survive mildly corrosive packaging environments.
Is the Airtac MIJ Adjustable Cylinder MIJ32X10-10S the Right Cylinder?
When sizing this 32 mm bore actuator, note it sits between the MIJ25 (245.3 N push @0.5 MPa) and the larger MIJ40 (628.3 N push @0.5 MPa). The 10 mm external stop screw is ideal for setups requiring exact forward positioning without mechanical shims. Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot block is unavailable for this adjustable variant. The -S magnet enables position sensing.
Remember that the stop screw only trims the extend end point; it is not a mid-stroke lock. A plain pneumatic cylinder will drift and drop its load on air loss, as the fixed TPU bumpers only soften the end of travel. To hold a load securely, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X10-10S FAQ
This 32 mm bore double-acting cylinder features a 1/8" port and a male M10x1.25 rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, allowing you to set the exact forward end position without swapping cylinders; the retract stroke remains full length. The -S suffix means it has a built-in piston magnet for use with CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.