Airtac MIJ Adjustable Cylinder MIJ32X100-10
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X100-10 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X100-10
Tune your forward end position on-site with the AirTAC MIJ32X100-10, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 10 mm, providing a usable forward range of 90-100 mm without changing the physical cylinder. The retract stroke remains full length. This riveted construction unit uses a 1/8" port, a Ø12 mm piston rod, and an M10x1.25 male rod thread.
Delivering 402.2 N of push force and 345.6 N of pull force at 0.5 MPa, it handles substantial workloads with a safe working load around 241 N, translating to a vertical lift capacity of about 20.5 kg with a 2:1 safety margin. The stainless barrel and rod resist mild corrosion and washdown environments. Fixed TPU bumper pads decelerate the piston at the stroke ends. Note that this specific SKU lacks a magnet and cannot accept position sensors; the -S variant is required for CMSG, DMSG, or EMSG switches.
Airtac MIJ Adjustable Cylinder MIJ32X100-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X100-10 |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X100-10
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X100-10 Is Used
Transfer Line Diverter
Dial in the exact 90-100 mm extend position to deflect parts on a conveyor, absorbing linkage tolerances with the stop screw while applying 402.2 N of push force at 0.5 MPa.
Carton Flap Folder
Stage heavy cardboard flaps during case erecting. The fixed TPU bumpers absorb the impact, while the stainless build survives dusty, mildly humid packaging plant environments.
Clamp Station Adjuster
Secure heavy machining fixtures by fine-tuning the forward clamp position up to 10 mm, safely holding workloads under the 241 N safe working load limit.
Is the Airtac MIJ Adjustable Cylinder MIJ32X100-10 the Right Cylinder?
When sizing this unit, consider the force boundaries: stepping down to a Ø25 bore drops the 0.5 MPa push force to 245.3 N, while stepping up to a Ø40 bore increases it to 628.3 N. The 10 mm external stop screw is ideal for taking up mechanical tolerances during setup or staging feeds, allowing one part number to cover several intermediate stops. You can mount this cylinder using LB foot, FA flange, or TC trunnion brackets, but the SDB pivot-block is not available on this adjustable variant.
Keep in mind that the stop screw sets the end position but does not function as a mid-stroke lock or brake. If air pressure is lost or the valve is centered, the piston will drift and cannot hold a load. For applications requiring held loads, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X100-10 FAQ
This 32 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it provides 402.2 N push and 345.6 N pull force. At 0.7 MPa it provides 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, giving a usable forward range of 90-100 mm, while the retract stroke remains full. The screw only sets the end position and is not a mid-stroke lock. This SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors; you must specify the -S variant for sensing capabilities.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X100-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.