Airtac MIJ Adjustable Cylinder MIJ32X150-100
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X150-100 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X150-100
Trimming the forward end by up to 100 mm on site, the AirTAC MIJ32X150-100 lets you dial in a precise 50 to 150 mm extend position without swapping hardware. This double-acting round-body mini cylinder delivers 402.2 N of push force at 0.5 MPa, yielding a safe working load of roughly 241 N or a 20.5 kg vertical lift with a 2:1 margin.
Built with a stainless-steel barrel and Ø12 mm rod for mild washdown resistance, it runs on a 1/8" port with an M10x1.25 male thread. Fixed TPU bumper pads decelerate the stroke end, and because this SKU lacks the -S magnet, it cannot host CMSG/DMSG/EMSG sensors. The external stop screw sets the forward endpoint but is not a mid-stroke lock.
Airtac MIJ Adjustable Cylinder MIJ32X150-100 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X150-100 |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X150-100
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X150-100 Is Used
Adjustable Stop Pressing
Dial in the exact 50-150 mm extend position for pressing bearings, using the 402.2 N push force to seat components without over-traveling.
Changeover Feed Gates
Re-tune the forward stop on the fly for different product lengths on a packaging line, saving setup time by keeping one cylinder SKU.
Tolerance Take-up Clamping
Absorb part variations during mid-force clamping tasks, relying on the 241 N safe working load to secure workpieces gently.
Is the Airtac MIJ Adjustable Cylinder MIJ32X150-100 the Right Cylinder?
For lighter jobs, the MIJ25 bore drops the 0.5 MPa push force to 245.3 N, while stepping up to the MIJ40 provides 628.3 N for heavier tooling. Here, the 100 mm adjustment window is ideal for absorbing mechanical tolerances or staging feeds across changeovers, letting one part number cover several stops.
Note that the piston drifts on air loss, so add an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is unavailable on this adjustable variant), and specify the -S version if you later require position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X150-100 FAQ
At 0.5 MPa it provides 402.2 N push and 345.6 N pull; at 0.7 MPa it yields 563 N push and 483.8 N pull, with a theoretical max of 82 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
An external stop screw shortens the extend stroke by up to 100 mm (retract remains full), but it only sets the end position and does not lock the load mid-stroke. This specific SKU has no magnet (-S), so it cannot accept CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X150-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.