Airtac MIJ Adjustable Cylinder MIJ32X150-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X150-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X150-10S
Dial in your forward end position on-site with the AirTAC MIJ32X150-10S, a round-body stainless mini cylinder featuring a 10 mm extend adjustment window. Rather than machining custom spacers or ordering multiple part numbers to hit a 140-150 mm forward stop, the external screw lets you trim the extend stroke precisely while retract remains full. Driven by filtered air at 0.15-1.0 MPa through a 1/8" port, the Ø12 mm piston rod delivers 402.2 N of push force at 0.5 MPa. The stainless-steel barrel and rod construction resists mild corrosion and washdown environments.
This double-acting actuator relies on fixed TPU bumper pads to decelerate the stroke end, operating at speeds of 30-800 mm/s. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing. The external stop screw sets the forward endpoint but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. With a safe working load of roughly 241 N (about 60% of the 0.5 MPa push force), it provides robust motion for heavier tooling.
Airtac MIJ Adjustable Cylinder MIJ32X150-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X150-10S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X150-10S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X150-10S Is Used
Press Fit Tooling
Drive a 241 N safe working load into a bearing housing, using the 10 mm extend stop to dial in the exact insertion depth without reprogramming the machine.
Heavy Diverter Gate
Actuate a larger routing flap on a washdown line; the stainless build handles moisture while the 402.2 N push force moves heavier cartons reliably.
Pallet Stopper Arm
Halt pallets at a staging zone using the 140-150 mm extend window, making micro-adjustments to the stop position as pallet tolerances vary.
Is the Airtac MIJ Adjustable Cylinder MIJ32X150-10S the Right Cylinder?
When sizing this 32 mm bore against the range, dropping down to an MIJ25 yields 245.3 N push at 0.5 MPa, whereas stepping up to the MIJ40 provides 628.3 N. The 10 mm external stop is invaluable for taking up mechanical tolerances during setup or staging feeds across changeover jobs without swapping cylinders. Mount this actuator using LB foot, FA flange, or TC trunnion brackets; note that the SDB pivot block is not offered on this adjustable variant. Back cover options include CA, U, R, and CM.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X150-10S FAQ
It features a 1/8" air port and a male M10x1.25 rod thread. At 0.5 MPa it provides 402.2 N push and 345.6 N pull; at 0.7 MPa it provides 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, letting you set a precise 140-150 mm forward position without changing the cylinder; retract remains full. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors. Fixed TPU bumpers decelerate the stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X150-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.