Airtac MIJ Adjustable Cylinder MIJ32X150-30S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X150-30S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X150-30S
Dial in a precise forward end position on-site with the AirTAC MIJ32X150-30S, a round-body stainless-steel mini cylinder featuring a 30 mm adjustable extend stroke. An external stop screw lets you shorten the forward travel from its 150 mm nominal down to 120 mm, absorbing setup tolerances without changing the cylinder. Retract travel remains full. As a larger Ø32 bore unit, it uses a non-ISO-6432 interface and delivers substantial force, pushing 402.2 N at 0.5 MPa.
Built with a stainless-steel barrel and rod for mild corrosion and washdown resistance, this double-acting actuator operates at 30-800 mm/s. It ports via 1/8" threads with a Ø12 mm rod. For sizing, a safe working load is roughly 241 N, or it can vertically lift about 20.5 kg with a 2:1 margin. The included -S magnet enables CMSG, DMSG, and EMSG sensor switches, while fixed TPU bumper pads decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ32X150-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X150-30S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X150-30S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X150-30S Is Used
Staged Diverting
Trim the extend stroke up to 30 mm to push varying box sizes onto secondary lines without swapping actuators, utilizing the 402.2 N push force.
Fill Head Positioning
Fine-tune the downward extend stop on-site to set precise fill depths for different container heights in washdown-resistant stainless builds.
Pallet Changeover
Adjust the forward stop to handle mixed pallet dimensions quickly, relying on the 241 N safe working load to push loads into staging.
Is the Airtac MIJ Adjustable Cylinder MIJ32X150-30S the Right Cylinder?
When sizing this Ø32 bore, verify your force needs against the 402.2 N push and 345.6 N pull at 0.5 MPa. If your application requires less force, stepping down to a Ø25 MIJ yields 245.3 N push; if you need more, a Ø40 MIJ provides 628.3 N push. The 30 mm external adjuster is ideal for changeover jobs or taking up mechanical tolerance, letting one part number cover several forward stops. Note that the stop screw only trims the extend end and does not function as a mid-stroke lock. The piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. Mounting options include LB, FA, and TC styles, but SDB pivot blocks are not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X150-30S FAQ
This double-acting cylinder uses a 1/8" air port and a Ø12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm, setting the forward end position without affecting the full retract stroke. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Fixed TPU bumpers decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X150-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.