Airtac MIJ Adjustable Cylinder MIJ32X30-10
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X30-10 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X30-10
Dial in a precise forward end position on-site with the AirTAC MIJ32X30-10, a round-body stainless steel mini cylinder featuring a 10 mm external stroke adjuster. Rather than swapping components to hit a new stop, you simply turn the external screw to shorten the extend stroke from its 30 mm nominal length down to 20 mm. The retract stroke remains full length. Built with a riveted stainless barrel and rod, it handles mild washdown environments without issue.
Driven by a 32 mm bore and a 1/8" port, this double-acting actuator delivers 402.2 N of push force at 0.5 MPa. For practical sizing, that translates to a safe working load of roughly 241 N, or a vertical lift of about 20.5 kg with a 2:1 safety margin. It relies on fixed TPU bumper pads to decelerate the stroke end. Note this non-ISO-6432 size omits a piston magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ32X30-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X30-10 |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X30-10
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X30-10 Is Used
Precision Gauging Stop
Use the 10 mm extend adjuster to fine-tune a hard stop for parts inspection. With 402.2 N of push force, it securely holds components weighing up to 20 kg for measurement.
Staged Diverting Gate
Dial the 30 mm extend stroke down to route varying package sizes on a line. The stainless build withstands mild washdown, and fixed bumpers absorb the impact.
Tooling Changeover Pin
Set the exact forward pin location for quick fixture changeovers without machining new stops. The 1/8" port delivers rapid actuation for machine cycling.
Is the Airtac MIJ Adjustable Cylinder MIJ32X30-10 the Right Cylinder?
If 402.2 N of push at 0.5 MPa is too much, the next size down is the MIJ25, which provides 245.3 N. If you need more power, the MIJ40 pushes 628.3 N. The 10 mm external stop screw on this model is ideal for taking up mechanical tolerances during setup or staging feeds, letting one part number cover several slightly different forward stops. The stop screw sets the end position but is not a mid-stroke lock.
Because this SKU lacks the -S magnet, it cannot accept position sensors. Mounting options include LB foot, FA flange, and TC trunnion, but the SDB pivot block is not available on this adjustable variant. Remember that a standard cylinder drifts on air loss; for a held load, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X30-10 FAQ
This 32 mm bore cylinder features a 1/8" port and a M10x1.25 male rod thread. At 0.5 MPa it provides 402.2 N push and 345.6 N pull force. At 0.7 MPa it yields 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, yielding a usable 20-30 mm forward travel while retract remains full. This SKU has no magnet, so it cannot take CMSG, DMSG, or EMSG sensors; you need the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X30-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.