Airtac MIJ Adjustable Cylinder MIJ32X50-30TC
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X50-30TC is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X50-30TC
Dial in your forward end position on the fly with the AirTAC MIJ32X50-30TC, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 30 mm on-site, giving a usable forward range of 20-50 mm without changing the unit. Retract remains at the full 50 mm. The riveted stainless barrel and Ø12 mm rod shrug off mild corrosion and washdown environments. As a larger Ø32 bore, this is a non-ISO-6432 size, yet it retains the compact mini footprint and fixed TPU bumper pads to decelerate the stroke end.
This bore moves serious weight, delivering 402.2 N of push force and 345.6 N of pull at 0.5 MPa. For practical sizing, that translates to a safe working load of roughly 241 N, or vertically lifting about 20.5 kg with a 2:1 safety margin. Air connects via a 1/8" port, and the male rod thread is M10x1.25. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ32X50-30TC Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X50-30TC |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X50-30TC
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X50-30TC Is Used
Diverter Gate Positioning
Trim the extend stroke by up to 30 mm to perfectly set a diverter flap angle on the fly, using the 402.2 N push force to reliably route heavier packages without swapping cylinders.
Multi-Stop Clamping Station
Use the adjustable forward end to clamp parts of varying heights in a machining cell, leveraging the 20.5 kg vertical lift capacity to secure workpieces before cycling.
Staged Carton Pushing
Fine-tune the push-off distance for different carton sizes on a packing line, dialing in the exact 20-50 mm extend position to stage products without overtravel.
Is the Airtac MIJ Adjustable Cylinder MIJ32X50-30TC the Right Cylinder?
When sizing this model against adjacent bores, step down to the Ø25 MIJ (245.3 N push @0.5 MPa) for lighter duties, or step up to the Ø40 MIJ (628.3 N push @0.5 MPa) if you need more force. The 30 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds during changeovers, letting one part number cover several intermediate stops. The TC trunnion mount supports pivoting loads, but remember that SDB pivot blocks are not offered on this adjustable variant.
Keep in mind the stop screw only sets the forward end position; it is not a mid-stroke lock. If air pressure drops, the piston will drift. For applications requiring held loads, you must add an external rod lock or a pilot-operated check valve. The fixed TPU bumpers absorb end-of-stroke impact across the 30-800 mm/s speed range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X50-30TC FAQ
This double-acting cylinder uses a 1/8" port and delivers 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm (usable range 20-50 mm); retract remains full. This screw sets the end position but is not a mid-stroke lock. Also, this SKU lacks a magnet (-S), so it cannot accept position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X50-30TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.